Design and Application of Sdh Digital Cross-Connect System

GW Shi,Q Wang,LG Zeng

DOI: https://doi.org/10.1109/icccas.2002.1179019

2002-01-01

Abstract:In this paper, we analyze the multiplexing structure of the STM-1 frame. On this basis, we present the design principle of a SDH digital cross-connect (SDXC) system, which is implemented using field programmable gate arrays (FPGA). The SDXC system enables construction of a flexible SDH network.

What problem does this paper attempt to address?

Design And Applications Of Sdh Cross-Connection Asic

P Rong,Dp Jin,Lg Zeng

DOI: https://doi.org/10.1109/ICCT.2000.890854

2000-01-01

Abstract:The development of Synchronizing Digital Hierarchy (SDH) technique relies on the evolution of ASICs. This paper introduces a novel SDH cross-connection ASIC designed by the E&E Department of Tsinghua University. This chip can Provide nonblocking cross-connection based on any combination of TU channels between eight STM-I input streams and eight STM-I output streams. And a newly developed built-in test circuit is embedded within the chip. This paper also analyses its timing performance and presents its applications.
Design and application of ATM-SDH multiplex/demultiplex ASIC

Zhi Jun,Wei Shaojun,Chen Hongyi

DOI: https://doi.org/10.1109/ICCT.1998.743072

1998-01-01

Abstract:The combination of ARM and SDH is of great importance in the future high speed telecommunication network. In our work, we pointed out the need of the low speed ATM transmission through SDH, analyzed the system requirement planned an ASIC to implement the ATM-SDH multiplex/demultiplex system, designed the chip architecture, described the chip using VHDL coding, and implemented the chip by ALTERA FPGA. Several possible application configurations using the ASIC and the chip verification system are also introduced
Terabit WSDM Optical Access Network Using Multicore Fibers and Advanced Modulation Formats

Zhenhua Feng,B. Li,R. Wang,Rui Lin,Ming Tang,Zhilin Xu,Songnian Fu,Weijun Tong,S. Liu,Perry Ping Shum

2015-01-01

Abstract:We proposed a hybrid wavelength-space division multiplexing (WSDM) optical access network architecture utilizing multicore fibers (MCFs) with advanced modulation formats. As a proof of concept, we ...
A High-Performance and Flexible Architecture for Accelerating SDN on the MPSoC Platform

Meng Sha,Zhichuan Guo,Yunfei Guo,Xuewen Zeng

DOI: https://doi.org/10.3390/mi13111854

2022-10-29

Abstract:Software-defined networking has been developing in recent years and the separation of the control plane and the data plane has made networks more flexible. Due to its flexibility, the software method is used to implement the data plane. However, with increasing network speed, the CPU is becoming unable to meet the requirements of high-speed packet processing. FPGAs are usually used as dumb switches to accelerate the data plane, with all intelligence centralized in the remote controller. However, the cost of taking the intelligence out of the switch is the increased latency between the controller and the switch. Therefore, we argue that the control decisions should be made as locally as possible. In this paper, we propose a novel architecture with high performance and flexibility for accelerating SDN based on the MPSoC platform. The control plane is implemented in the on-chip CPU and the data plane is implemented in the FPGA logic. The communication between the two components is performed using Ethernet communication. We design a high-performance TCAM based on distributed RAM. The architecture employs a pipeline design with modules connected via the AXI Stream interface. The designed architecture is flexible enough to support multiple network functions while achieving high performance at 100 Gbps. As far as we know, the architecture is the first proposed in the design of a 100 Gbps system.
Data Switching Chip Design in MSTP on SDH

黄波文,葛宁

DOI: https://doi.org/10.3969/j.issn.1001-893x.2003.06.009

2003-01-01

Abstract:This paper introduces the design of a PoS data switch chip in the MSTP on SDH to supply the flexible data services in the transport and access equipment. The structure of the chip is based on a shared-memory switch structure, and an advanced pipeline technology is used to improve the switch capacity of the chip. This chip provides QoS guarantee and implements multicast capacity, and it can be used in the SDH transport and access equipment. It provides a simple and high-level efficient solution for the transportation of data services on SDH.
Design and Implementation of MSTP Based on SDH

SHI Xiao-jie

DOI: https://doi.org/10.3969/j.issn.1008-3545.2012.02.007

2012-01-01

Abstract:Based on the introduction of MSTP' advantages,we research the design and implementation of MSTP based on SDH.Hardware composition and software structure of the system are discussed.We introduce the hardware module in detail—control and management module,cross-connect module,ethernet module,E1 module,optical interface module,clock synchronization and distribution module,power supply module,and software module—overhead processing module,device configuration module,device alarm management module.Also study the development trend and conclusions of MSTP based on SDH.
ASIC design in ATM-SDH multiplex/demultiplex system

Jun ZHI,Shaojun WEI,Hongyi CHEN

DOI: https://doi.org/10.3321/j.issn:1000-0054.1999.Z1.027

1999-01-01

Abstract:In order to transmit low speed asynchronous transfer mode (ATM) signal through synchronous digital hierarchy (SDH) network efficiently, a THHT97C01 ASIC in ATM SDH multiplex/demultiplex system is designed. To design the ASIC, a VHDL based, top down design methodology with system partition, algorithm analysis, VHDL description and synthesis etc. is adopted. The ASIC is implemented by ALTERA FPGA for hardware verification, and is used to build a demo system. An 8 channel 25.6Mbit/s ATM transmission system through 155.52Mbit/s SDH network and its hardware structure is proposed in this article, and a complete low speed ATM/SDH solution and a set of functional blocks for design reuse are ready for the future projects.
Design and implementation of an 155Mb/s SDH optical transmission encryption device

Xiaojie SHI,Guangxiang WU

DOI: https://doi.org/10.13921/j.cnki.issn1002-5561.2018.01.009

2018-01-01

Abstract:Optical transmission network security issues have become increasingly prominent, the urgent need for a encryption device which can effectively solve the problem of information transmission security. This pa-per analyzes the characteristics of the frame structure of SDH, combined with SDH networking equipment, designs a 155Mb/s optical transmission encryption device based on SDH, and introduces the components and the specific implementation method of device. The experiment proves that the combination of the device and SDH optical transmission equipment used in network, the introduction of low transmission delay and high transmission reliability can effectively improve the security of SDH optical network information transmission.
Design for active optical network based on SDH

Jia Chun-yang

Abstract:A project of access solution of active optical network is constructed based on SDH,equipment,protocol converters and telephone terminals.By simplifying the functions and configuring the network management system of the SDH equipments,the IP transmission and voice communication have been achieved.The system which completes bidirectional voice communication and image transmission can reduce equipments complexity and resource waste when SDH is used in the access network.

Engineering,Computer Science
Implementation of Adaptive Spatial Field Digital Modulation System Without Phase Measurement

Yuqi Chen,Xiaowen Xiong,Zelin Zhu,Bincai Wu,Bingchen Pan,Jun Wen,Xiaonan Hui,Shilie Zheng,Xianmin Zhang

DOI: https://doi.org/10.1109/ICMMT58241.2023.10277642

2023-01-01

Abstract:Spatial field digital modulation (SFDM) communication system is a special index modulation (IM) technique with low hardware complexity and physical layer security potential. However, the deployment of the SFDM system is always complicated and time-consuming. To solve the problems, an adaptive SFDM system without phase measurement is proposed and implemented in this paper. We design a system architecture fit for self-adjustment and propose the corresponding adaptive algorithm. The state isolation and the BER performance are measured under an indoor channel, which verifies its validity.
SDH Virtual Concatenation technique used in Ethernet data transport

Guowei Shi,Qing Wang,Zhao Liu,Lieguang Zeng

DOI: https://doi.org/10.1109/ICCCAS.2002.1179124

2003-01-01

Abstract:Transferring Ethernet Frame over SDH (EOS) is a simple and robust technique to connect LANs within a private and public network. But until now, when mapping Ethernet Frame into SDH stream, Ethernet have to be brute-forced into an oversized SDH carrier, and which will inevitably cause a huge waste of bandwidth. In this paper, we utilize Virtual Concatenation technique to 'right-size' the SDH pipes for Ethernet - transport Gigabit Ethernet data using a group of virtually concatenated STS-1 timeslots within a 2.5 Gbps SDH carrier. By using the technique we can improve the bandwidth efficiency of the transport networks as well as implement the dynamic allocation of bandwidth resources.
An All Digital Packet DS-CDMA Transceiver for HFC Network Upstream Transmission

YF Guan,ZY Zhang,YY Cui,XF Jiao,PL Qiu

DOI: https://doi.org/10.1109/apccas.2000.913615

2000-01-01

Abstract:This paper presents the architectures, algorithms, and implementation considerations of an efficient all digital DS-CDMA transceiver used for upstream burst-mode packet transmission in an Hybrid Fiber Coax (HFC) Network, which aims to support integrated services. The transmitter is frequency agile and it supports fine adjustment of signal power and chip delay, which are reserved for MAC ranging in the initialization process. The receiver has corresponding Received Signal Strength Indicator (RSSI) unit as well as frequency offset and chip delay estimation module. To achieve fast acquisition, the receiver employs a parallel correlation FIR filter architecture, and the resultant hardware complexity of the correlator can be reduced by optimizing the structure. Field trials show it can work under a CNR as low as -12 db, and the acquisition can be achieved within 2 data bytes. The architecture is very suited for ASIC design
A New Method Toward SDH/ADM Tributary System Integration

S Xia,LG Zeng

DOI: https://doi.org/10.1109/icct.1996.545007

1996-01-01

Abstract:SDH combined with ATM has become the foundation of the information superhighway. We provide a new method toward an SDH/ADM tributary system integration which establish several direct passages between the multiplexer and demultiplexer of one ADM equipment at the TUG-3, TUG-2 and TU-12 points. This method reduces the idle units and make the configurations according to the different services more easily. We use FPGAs to realize the hardware of the tributary system which covers 2 Mbit/s PDH to SDH TUG-3. Any one of the 63 channels can be selected and added/dropped
Design and Implementation of the Switch Unit with 160G Capacity in ASON Equipment

冯杰,王航,金德鹏,伍浩成

DOI: https://doi.org/10.3969/j.issn.1002-5561.2010.05.005

2010-01-01

Abstract:A design of switch unit with 160G capacity,based on SDH/SONET technology,is introduced in this paper,the key function of the hardware and software components in the design are described in detail.
Hardware Programmable SDM/WDM ROADM.

Yanlong Li,Shuangyi Yan,Nan Hua,Yanni Ou,Fengchen Qian,Reza Nejabati,Dimitra Simeonidou,Xiaoping Zheng

DOI: https://doi.org/10.1364/ofc.2017.th2a.21

2017-01-01

Abstract:A novel hardware-programmable and scalable SDM/WDM ROADM architecture is proposed with a heuristic hardware-planning algorithm for multi-dimensional networks. Availability and performance of the proposed architecture and algorithm are evaluated by simulation and experiment.
Design and Realization of CM and CMTS Based on DOCSIS

赵志彪,冯振明,陆明泉

DOI: https://doi.org/10.3969/j.issn.1001-893X.2001.04.011

2001-01-01

Abstract:HFC (Hybrid Fiber Coax) provides a kind of broadband access way for multimedia and broadband services. The structure and the spectrum allocation scheme of HFC are described. The MAC layer and PHY layer of dual-direction HFC network are analyzed in detail. The upstream channel allocation scheme in MAC and the scenario of PHY in DOCSIS (Data-Over-Cable Service Interface Specification) are presented. Finally, The software and hardware designs of CM (Cable Modem) and CMTS (Cable Modem Terminal System) conforming to DOCSIS are given.
Design and Application of SDH Pointer Leakage ASIC MXTULPx8-5

X Guo,DP Jin,LG Zeng

DOI: https://doi.org/10.1109/icccas.2002.1179022

2002-01-01

Abstract:The development of the synchronous digital hierarchy (SDH) technique relies on the evolution of ASICs. This paper introduces the characteristics of the SDH pointer leakage ASIC MXTULPx8-5, which has been designed independently by the E&E Department of Tsinghua University. This chip can compensate for plesiochronous relationships between incoming and outgoing higher level (AU4) synchronous payload envelope frame rates through processing of the lower level (TU11, TU12, or TU3) tributary pointers, so that the aligned tributaries can be easily column switched by the SDH tributary unit cross-connect chip. The time-sliced multiplexing design method is introduced as the key technique, and the tributary elastic buffer size is calculated. The application example of MXTULPx8-5 is also described.
Layered OXC with Intermode Switching Bridge for Optical SDM-WDM Networks

Dawei Ge,Bingli Guo,Yu Yang,Zhangyuan Chen,Yongqi He,Jin He,Juhao Li

DOI: https://doi.org/10.1109/jlt.2019.2920450

IF: 4.7

2019-01-01

Journal of Lightwave Technology

Abstract:Recently, spatial-division-multiplexing based on weakly coupled multicore or few-mode fibers has been proposed for short-reach switching scenarios, in which spatial mode can be used as an independent switching dimension. Fully connected cross-connections (OXC) converting all spatial modes and wavelengths into one-dimensional switching ports and followed by huge switching array can provide nonblocking switching, but the hardware implementation is very complex and expensive. In this paper, we propose a layered OXC structure consisting of intramode sub-OXCs and intermode switching bridges. Then, a scattered-spectrum-scan intramode-first routing and spectrum allocation (SSS-IMF-RSA) scheme is designed, in which only a few discrete spectrum segments instead of the whole spectrum should be scanned for spectrum allocation. The switching will be performed preferentially for the wavelength dimension because of mature switching capability and less searching time. We show by simulation that the proposed layered OXC with the SSS-IMF-RSA scheme can achieve similar blocking performance to fully connected OXCs with up to 76.1% hardware scale reduction and 93% searching time reduction for network accommodation. The proposed OXC and RSA scheme greatly decrease the requirements for the port number of WSS and enable components reuse to achieve smooth evolution.
Design of a hybrid modular switch

Ashkan Aghdai,Yang Xu,H. Jonathan Chao

DOI: https://doi.org/10.1109/NFV-SDN.2017.8169825

2017-01-01

Abstract:Network Function Virtualization (NFV) shed new light for the design, deployment, and management of cloud networks. Many network functions such as firewalls, load balancers, and intrusion detection systems can be virtualized by servers. However, network operators often have to sacrifice programmability to achieve high throughput, especially at networks' edge where complex network functions are required. Here, we design, implement and evaluate Hybrid Modular Switch (HyMoS). The hybrid hardware/software switch aims to meet the requirements of modern-day NFV applications by providing high-throughput, highly programmable packet forwarding. HyMoS utilizes P4-compatible Network Interface Cards (NICs), PCI Express interface and CPU to act as line cards, switch fabric, and fabric controller respectively. HyMos turns PCI Express interface into a non-blocking switch fabric with a throughput of hundreds of Gigabits per second. Compared to existing NFV infrastructure, HyMoS offers modularity in hardware and software as well as a higher degree of programmability by supporting a superset of P4 language.
A Novel OXC Architecture Utilizing Switching Bridges for Mode Division Multiplexing Optical Networks

Yumeng Hao,Juhao Li,Xin Chen,Yongqi He,Zhangyuan Chen

DOI: https://doi.org/10.1364/acpc.2015.am3g.4

2015-01-01

Abstract:We propose a novel large-scale OXC architecture that utilizes intra-mode optical cross-connect sub-elements and inter-mode switching bridges. We show by simulation that the proposed OXC architecture attains significant hardware scale reduction and similar blocking performance to the one-dimensional fully-connected OXC.

Design and Application of Sdh Digital Cross-Connect System

Design And Applications Of Sdh Cross-Connection Asic

Design and application of ATM-SDH multiplex/demultiplex ASIC

Terabit WSDM Optical Access Network Using Multicore Fibers and Advanced Modulation Formats

A High-Performance and Flexible Architecture for Accelerating SDN on the MPSoC Platform

Data Switching Chip Design in MSTP on SDH

Design and Implementation of MSTP Based on SDH

ASIC design in ATM-SDH multiplex/demultiplex system

Design and implementation of an 155Mb/s SDH optical transmission encryption device

Design for active optical network based on SDH

Implementation of Adaptive Spatial Field Digital Modulation System Without Phase Measurement

SDH Virtual Concatenation technique used in Ethernet data transport

An All Digital Packet DS-CDMA Transceiver for HFC Network Upstream Transmission

A New Method Toward SDH/ADM Tributary System Integration

Design and Implementation of the Switch Unit with 160G Capacity in ASON Equipment

Hardware Programmable SDM/WDM ROADM.

Design and Realization of CM and CMTS Based on DOCSIS

Design and Application of SDH Pointer Leakage ASIC MXTULPx8-5

Layered OXC with Intermode Switching Bridge for Optical SDM-WDM Networks

Design of a hybrid modular switch

A Novel OXC Architecture Utilizing Switching Bridges for Mode Division Multiplexing Optical Networks