Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

High photovoltaic performance of ladder-type oligo-p-phenylene containing copolymers with high open-circuit voltages

Ladder-Type Oligo-<i>p</i>-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity

Ladder-Type Tetra-P-Phenylene-Based Copolymers for Efficient Polymer Solar Cells with Open-Circuit Voltages Approaching 1.1 V

Ladder‐type Diindenopyrazine Based Conjugated Copolymers for Organic Solar Cells with High Open‐circuit Voltages

Donor–acceptor Copolymers Based on Phenanthrene As Electron‐donating Unit: Synthesis and Photovoltaic Performances

Novel ladder-type heteroheptacene-based copolymers for bulk heterojunction solar cells

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Improved synthesis and photovoltaic performance of donor–acceptor copolymers based on dibenzothiophene-cored ladder-type heptacyclic units

Electron‐Donating Ladder‐Type Heteroacenes for Photovoltaic Applications: from Polymer Donor Materials to Small‐Molecule Acceptor Materials

Polymerizing Ladder-type Heteroheptacene-Cored Small-Molecule Acceptors for Efficient All-Polymer Solar Cells

Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

Ladder-type Dithienocyclopentadibenzothiophene-Cored Wide-Bandgap Polymers for Efficient Non-Fullerene Solar Cells with Large Open-Circuit Voltages

The photovoltaic behaviors of PPV- and PPE-type conjugated polymers featured with diketopyrrolopyrrole (DPP) units

4,5-Ethylene-2,7-carbazole-based Medium-Bandgap Conjugated Polymers with Low-Lying Homo Levels Toward Efficient Polymer Solar Cells with High Open-Circuit Voltage

Dialkoxynaphthalene As an Electron-Rich Unit for High-Performance Polymer Solar Cells with Large Open Circuit Voltages

Short-axis substitution approach on ladder-type benzodithiophene-based electron acceptor toward highly efficient organic solar cells

Synthesis and Photovoltaic Behaviors of Benzothiadiazole- and Triphenylamine-Based Alternating Copolymers

Diketo-Pyrrolo-Pyrrole-Based Medium Band Gap Copolymers for Efficient Plastic Solar Cells: Morphology, Transport, and Composition-Dependent Photovoltaic Behavior

Dopant‐Free, Donor–Acceptor‐Type Polymeric Hole‐Transporting Materials for the Perovskite Solar Cells with Power Conversion Efficiencies over 20%

A High‐Mobility Low‐Bandgap Copolymer for Efficient Solar Cells

Developing Halogen‐Free Polymer Donors for Efficient Nonfullerene Organic Solar Cells by Addition of Highly Electron‐Deficient Diketopyrrolopyrrole Unit