Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

Dialkoxynaphthalene As an Electron-Rich Unit for High-Performance Polymer Solar Cells with Large Open Circuit Voltages

Donor–acceptor Copolymers Based on Phenanthrene As Electron‐donating Unit: Synthesis and Photovoltaic Performances

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Synthesis and photovoltaic properties of D-A copolymers of benzodithiophene and naphtho[2,3-c]thiophene-4,9-dione

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

Donor-Acceptor Photovoltaic Polymers Based On 1,4-Dithienyl-2,5-Dialkoxybenzene With Intramolecular Noncovalent Interactions

Theoretical investigations on donor-acceptor conjugated copolymers based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for organic solar cell applications

Naphthobisthiadiazole-Based π-Conjugated Polymers for Nonfullerene Solar Cells: Suppressing Intermolecular Interaction Improves Photovoltaic Performance

Novel Two‐dimensional Donor–acceptor Conjugated Polymers Containing Quinoxaline Units: Synthesis, Characterization, and Photovoltaic Properties

Naphthalenothiophene imide-based polymer exhibiting over 17% efficiency

Cyclopentadithiophene Cored A-π-D-π-A Non-Fullerene Electron Acceptor in Ternary Polymer Solar Cells to Extend the Light Absorption Up to 900 Nm

Synergistic enhancement in open-circuit voltage and photovoltaic performance via linear naphthyldithiophene building block

Tuning The Frontier Molecular Orbital Energy Levels Of N-Type Conjugated Copolymers By Using Angular-Shaped Naphthalene Tetracarboxylic Diimides, And Their Use In All-Polymer Solar Cells With High Open-Circuit Voltages

Naphtho[2,3-c]thiophene-4,9-dione based polymers for efficient fullerene solar cells

Ladder-Type Oligo-<i>p</i>-phenylene-Containing Copolymers with High Open-Circuit Voltages and Ambient Photovoltaic Activity

Synthesis of Medium Bandgap Copolymers Based on Benzotriazole for Non-Fullerene Organic Solar Cells

Donor Copolymer with Benzo[1,2-B:4,5-B′]dithiophene and Quinoxaline Derivative Segments for Photovoltaic Applications

Synthesis And Photovoltaic Properties From Inverted Geometry Cells And Roll-To-Roll Coated Large Area Cells From Dithienopyrrole-Based Donor-Acceptor Polymers

N-acyldithieno[3,2-b:2',3'-d]pyrrole-based Low-Band-gap Conjugated Polymer Solar Cells with Amine-Modified [6,6]-Phenyl-c61-butyric Acid Ester Cathode Interlayers.

Copolymers from benzodithiophene and benzotriazole: synthesis and photovoltaic applications

Using Cyclopenta[2,1-B:3,4-C ']Dithiophene-4-one As A Building Block for Low-Bandgap Conjugated Copolymers Applied in Solar Cells