Abstract:Position Sensitive Detector ( PSD) used for precision displacement measurement has high sensitivity and is easily affected by the background light. To remove the measurement error of PSD caused by background light, a measurement system that could avoid the influence of background light was designed. The system could modulate the light source as pulsed light with the help of Digit-al Signal Processer ( DSP) , and the signals were sampled at high level and low level PSD responses separately. The high level was the signal of light source and background light, while the low level was the signal of background light, thus the interference of background light could be removed by subtracting these two signals. The PSD current signals were transformed and amplified by special conditioning circuit, and collected through high precision A/D converter, then sent to DSP for data processing and position calculation. After collecting enough sample data, the linear calibration through the least square method was carried out to reduce the linear error. The precision and lineari-ty experiments were conducted under background light condition using the above method. The results showed that the precision improved from 100 μm to 15 μm, the average linear error decreased to 13μm, and the least sampling period was 2 ms. The system could effectively remove the influence of background light while keeping the precision, speed and linear error unaffected.

A Method for Measurement of Multiple Light Spot Positions on One Position-Sensitive Detector (Psd)

Position Measurements of Multiple Light Beams with One Position-Sensitive Detector (PSD)

Research on the 1D PSD

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

A novel design of multi-light LAPS based on digital compensation of frequency domain

Resolution Improvement of One-Dimensional Comb-Type PSD by Subdivision

Method for Mitigating Background Light Influence on PSD By Modulating Light Source in Space Payloads

Design Realization and Characterization of A Position Sensitive Detector for Fast Optical Measurement

Fabrication and characterization of a new type 4 × 4 arrayed position sensitive detector

Fabrication and Characterization of a New Type 4×4 Arrayed Position-Sensitive Detector

Novel Mlaps Using the Multilight and Digital Compensation Technique

Fabrication and Characterization of Two-Dimensional Pin-Cushion Position Sensitive Detectors

The Current-position Characteristics of Two Dimensional Positio n Sensitive Detectors with Different Anode Structure

Performance Parameter of 2D Position Sensitive Detector

A depth measurement method using two structured light binary patterns

Development of a New Signal Processor for Tetralateral Position Sensitive Detector Based on Single-Chip Microcomputer

Development of A Psd-Based Photon Beam Position Measurement System

Light disturbance to position sensitive detectors - pattern and method to overcome it

High-Precision Measurement Method for Small Angles Based on the Defect Spot Mode of the Position-Sensitive Detector

Measurement of focal light spot at single-photon level with silicon photomultipliers

Displacement measurement system based on phase-sensitive detection and position sensitive detector