Abstract:The traditional direct torque control (DTC) strategy utilizes the largest 14 voltage vectors for a seven-phase induction machine (7PIM), which is directly extended from the three-phase counterparts. This method suffers from the issues of severe harmonic currents and torque ripple for multiphase ones. This article first puts forward the concept of virtual vectors for a 7PIM. This can efficiently eliminate the third- and fifth-order harmonic currents. However, the DTC strategy based on the virtual voltage vector has insignificant effect on reducing the torque ripple. Then, the torque ripple caused by these virtual vectors in different torque and speed conditions is investigated. Analysis shows that there are some additional degrees of freedom while choosing the applied voltage vector. A novel sequential strategy integrated with duty ratio optimization algorithm is proposed to select the optimal voltage vector that can significantly alleviate the torque ripple. Experimental results verified that the proposed method can effectively reduce the dynamic and steady-state torque ripple as well as the harmonic current.This article utilizes a 7PIM for an illustration, but it should be mentioned here that the proposed strategy is applicable for multiphase machines with any number of phases.

Comparative Evaluation of Voltage Space Vector Control and Direct Instantaneous Torque Control for Switched Reluctance Motor Drives

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Direct Torque Control for 2L-VSI PMSM Using Switching Instant Table.

Sliding-mode Torque Distribution Control of SRM

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

A high efficiency direct instantaneous torque control of SRM using commutation angles control

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

Optimum Design of Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Overview of the Direct Torque Control Strategy in Switched Reluctance Motor Drives

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

A Simple Strategy for Parameters Identification of SRM Direct Instantaneous Torque Control

Low-Cost Direct Instantaneous Torque Control for Switched Reluctance Motors with Bus Current Detection under Soft-Chopping Mode

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Direct torque control for synchronous reluctance motor based on space vector modulation

Improved Torque Ripple of Switched Reluctance Motors using Sliding Mode Control for Electric Vehicles

An Improved Model Predictive Control Method of Switched Reluctance Motor Based on Direct Torque Control

Torque Ripple Minimization of a Novel Modular Stator Switched Reluctance Motor Based on Direct Instantaneous Torque Control

Simulation of Switched Reluctance Motor with an Optimized Direct Torque Control Minimizing Torque Ripple

Direct instantaneous torque control of switched reluctance motor based on adaptive backstepping