Abstract:Abstract Background: Recording of electrical activity of neurons is indispensable for decoding the information in the brain. The amplitude of signals recorded by electrodes is small, and it must be amplified to the level that can be digitalized by the analog-to-digital convert (ADC). A micro-power low-noise neural recording amplifier is indispensable for implant hippocampal cognitive prosthesis. When the process turns into deep submicron, the gate leakage current of the metal oxide semiconductor (MOS) transistor becomes larger and mismatch between devices becomes worsen. It is necessary to keep the neural amplifier robust in all process corners. Methods: The proposed circuit is a two-stage amplifier which can achieve a good trade-off between power consumption and noise. Four second-stage amplifiers share a common reference amplifier to reduce area and power consumption. A pseudo-resistor with high resistance is utilized to realize a very-low frequency high pass corner without external components. In order to minimize process variation, a bulk-compensated (BC) technique is adopted to maintain adequate tolerance in all corner case. Results: The 4-channel neural amplifier is designed and fabricated in a 40 nm standard complementary metal oxide semiconductor (CMOS) process. It achieves a mid-band gain of 54 dB, a bandwidth of 70 Hz to 7.7 kHz, a total input-referred noise of 3.2 μVrms , and a Noise Efficiency Factor (NEF) of 3.3 while consuming 4.68 µW from the 1.1 V supply. The core area of one channel is only 0.032 mm 2 . Conclusion: A 4-channel integrated neural recording amplifier chip with bias-compensated circuits is presented in this paper. Extensive simulations insure that the design is “center”. The chip layout is verified using design rules check (DRC) and layout versus schematic (LVS) design check with the help of verification tools. Test results shows that it is less sensitive to process variation and consumes less power compared with amplifier without bulk-compensated circuit. This makes the design robust and uniquely appropriate for low-power implant application.

A current-reuse complementary-input chopper-stabilized amplifier for neural recording

A 2.1/5.2-NEF/PEF Capacitively Coupled Instrumentation Amplifier with Fast - Settling for Biosensor

Low Noise CMOS Front-End Amplifier Used in Detection of Extracellular Neural Signals (ENG)

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

Design of Low Noise and Low Power Chopper Stabilized Amplifier for Neural Recording Applications

Design of A Low Noise Neural Recording Amplifier for Closed-loop Neuromodulation Applications

A Low-Noise Chopper Amplifier Designed for Multi-Channel Neural Signal Acquisition

A Fully-Differential Chopper Capacitively-Coupled Amplifier with High Input Impedance for Closed-Loop Neural Recording

A Low-Noise Chopper Amplifier with Offset and Low-Frequency Noise Compensation DC Servo Loop

A low-noise integrated bioamplifier with active DC offset suppression

An Ultralow-Power Low-Noise CMOS Biopotential Amplifier for Neural Recording

Power-to-Noise Optimization in the Design of Neural Recording Amplifier Based on Current Scaling, Source Degeneration Resistor, and Current Reuse

Low Noise Amplifier with Active Feedback Structure for Implantable Neural Recording.

Design of a 3.24μW, 39nV/√Hz chopper amplifier with 5.5Hz noise corner frequency for invasive neural signal acquisition

A 1.3&#x03bc;w 0.7&#x03bc;v<inf>rms</inf> Chopper Current-Reuse Instrumentation Amplifier for EEG Applications

A 1.3 Mu W 0.7 Mu V-Rms Chopper Current-Reuse Instrumentation Amplifier For Eeg Applications

A Low-Voltage Feed-forward Compensated Operational Transconductance Amplifier for Neural Signal Recording

A Low Power and Low 1/f Noise Chopper-Stabilized Amplifier with Current Recycling Technology

A Capacitively Coupled Chopper Instrumentation Amplifier with Compensated Auto-Zeroed DC Servo-Loop for Neural Signal Recording

Fully Integrated and Low Power CMOS Amplifier for Neural Signal Recording

A Low-Noise Preamplifier with Adjustable Gain and Bandwidth for Biopotential Recording Applications