Abstract:This article proposes a dual two-vector-based model predictive flux control (DTV-MPFC) strategy for open winding permanent magnet synchronous motor drives with two isolated voltage source inverters (VSIs). In the MPFC strategy, the reference stator flux vector can be compensated to realize field-weakening (FW) operation by controlling the value of the cost function. However, the accuracy of the cost function based FW strategy is limited when the tracking error of the stator flux vector exists. In this article, a DTV-MPFC strategy is proposed to synthesize the reference flux increment vector precisely and the FW operation boundary is kept within the linear modulation region to enhance the FW operation performance. Each inverter applies two vectors during the control period and the switching frequency of the VSIs is minimized with the proposed strategy. When the dc-link voltages of the VSIs are unequal, the number of candidate flux increment vectors and the distribution of the space vector plane are different. A generalized vector selection and duration calculation scheme is proposed to realize the DTV-MPFC strategy in this case. Experimental studies are carried out to verify the validity and effectiveness of the proposed strategy.

A modified flux weakening direct torque control for open winding PMSM system fed by hybrid inverter

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

Research on High-Speed Operation of Hybrid-Inverter Fed Open Winding Permanent Magnet Synchronous Motor

A Hybrid PWM-Based Field Weakening Strategy for a Hybrid-Inverter-Driven Open-Winding PMSM System

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Torque and Flux Weakening Control with MTPV for Interior Permanent Magnet Synchronous Motor

Improved Direct Torque Control for Open-Winding PMSM System Considering Zero-Sequence Current Suppression with Low Switching Frequency

Flux Weakening Control Of Interior Permanent Magnet Synchronous Machine To Improve Torque Performance

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Simplified PWM for Fault Tolerant Control of Open Winding PMSM Fed by Hybrid Inverter

Deep Flux Weakening Control With Six-Step Overmodulation For A Segmented Interior Permanent Magnet Synchronous Motor

A Dual Two-Vector-Based Model Predictive Flux Control with Field-Weakening Operation for OW-PMSM Drives

Flux Weakening Control of PMSM Driven by Single-Phase to Three-Phase Matrix Converter

Direct Torque Control Combined with Mtpa Concept for Open Winding Ipmsm

A modified Direct Torque Control for PMSM under inverter fault

Direct Torque Control for Three-Phase Open-End Winding PMSM With Common DC Bus Based on Duty Ratio Modulation

Improved Direct Resonant Control for Suppressing Torque Ripple and Reducing Harmonic Current Losses of DFIG-DC System