Abstract:The fabrication and assembly of High Temperature Superconducting (HTS) magnets can be significantly streamlined by (1) direct deposition of HTS onto modular components and (2) laser-ablated grooves to bound and guide the electric currents over the superconducting surfaces. "Coils" bounded by consecutive grooves can be individually powered, or connected in series, or in parallel. Applications include plasma-confinement devices such as stellarators and magnets for particle accelerators. On the way to HTS magnets generating more complicated three-dimensional fields, this paper validates the technique for two cylindrically symmetric magnets made of standard conductors. The optimized grooving pattern is considered as an inverse problem that is resolved using a least squares approach with Tikhonov regularization. This approach was first applied to design a magnet that replicates the magnetic field configuration of a microwave source of the gyrotron type. Gyrotrons require a particular profile of magnetic field, which our aluminium prototype successfully reproduced with 10$^{-1}$ precision. The second one, in copper, is a small-size, reduced-field magnet for Magnetic Resonance Imaging (MRI). This application requires highly uniform longitudinal fields. The achieved precision (about 50 ppm) is exceptional for an MRI magnet just getting out of the factory, and can easily meet hospital standards after minimal shimming or other error field correction. Future work and other potential applications of wide, patterned conductors or superconductors are also discussed.

Development of a Permanent Magnet As Magnetizer for Linear Magnetic Pattern Manufacturing

Permanent Magnet Linear Machines with Asymmetrical Tooth Tip

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Research on Permanent Magnet linear Synchronous Motors Driver for Micro-fabrication

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Comparative Investigation Of Single-Sided And Double-Sided Permanent Magnet Linear Motor

Design and Experimental Study of Permanent Magnet Machines with Magnetic Field Modulation

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Design and Performance Investigation of Novel Linear Switched Flux PM Machines

A Manufacturing Oriented Topology Optimization Methodology for Permanent Magnet Synchronous Motor

Ddesign of a Novel Electromagnetic Actuator and Analysis of the Critical Demagnetization State for Permanent Magnet

Development of Permanent Magnet Linear Synchronous Motor Controlling Technique

Development and Analysis of a Novel Transverse Flux Permanent Magnet Linear Motor With the Concentrated Flux Mover

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

Programmable Design of Magnet Shape for Permanent-Magnet Synchronous Motors with Sinusoidal Back EMF Waveforms

Overview on Permanent Magnet Motor Trends and Developments

Permanent Magnet Shape Optimization Method for PMSM Air Gap Flux Density Harmonics Reduction

Optimization of Magnetizing Parameters for Multi-Pole Magnetic Scales by Taguchi Method

Simplified magnet design and manufacture based on patterning of wide conductors

A Novel Linear Permanent Magnet Vernier Machine with Consequent-Pole Permanent Magnets and Halbach Permanent Magnet Arrays

Development of a Permanent Magnet Slotless Limited-Angle Torque Motor with a Moving Coil for Optical Scanning System