Abstract:Purpose The theoretical method of converting the magnetic circuit into an electric circuit is mature, but the way to determine the inductances in the electric circuit is not reliable, especially for the core working in saturation status, and it is impossible to determine the inductances by the transformer terminal measurements, as the measurement information is not enough to determine a number of inductances. This paper aims to propose an approach of calculating the reluctances. Design/methodology/approach In this paper, an approach of calculating the reluctances is proposed based on the numerical simulation of magnetic field in transformer with different values of current excitation. The reluctance of a core segment or air region as a branch of magnetic circuit is obtained by the magnetic energy and magnetic flux. By this way, all the reluctances as function of flux can be determined, and then the inductances can be determined. The reluctances and equivalent electric circuit of three-phase integrative transformer is determined, and its validation is proved in the paper. Findings The single phase example shows that the proposed method has a good performances on analysis of the inrush current in deep saturation. The peak value of the inrush current derived from the proposed approach matches well with the results obtained by coupled circuit-FEM analysis, and the difference is about 4.8 per cent. For studies on dual models of single phase transformers, the leakage inductances have important effects on the peak value of the inrush current. The reluctances of three-phase transformer are calculated, and the equivalent circuit simulation results are slightly smaller than the coupled circuit-FEM simulation results. Originality/value Approach of calculating the reluctances based on the numerical simulation of magnetic field in transformer is proposed. The magnetic core and air space are divided into several segments, and the reluctance for each segment is calculated based on the energy in the region and the flux of the cross-sectional area. By applying various excitation currents, all the reluctances as function of flux can be determined, and then all the non-linear inductances including the non-linear leakage inductances are obtained. The proposed approach is reliable to determine a number of inductances in the dual electric circuit, especially for deep saturation status.

Winding Current Utilization Calculation of Controllable Reactor of Transformer Type Based on Equivalent Leakage Reactance

Analysis on winding current of controllable reactor of transformer type

Calculation of Leakage Inductance of Two-Winding Transformer and Its Application to Impedance Voltage Design

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

An Optimization Method for Planar Transformer Winding Losses in GaN Based Multi-output Flyback Converter

Short-Circuit Reactances of a Controllable Reactor of Multi-Parallel Branch Type’s Influence on Its Branch Reactances and Currents

Different Short-Circuit Impedance Calculation Method of Controllable Reactor of Transformer Type

Analysis of Two Kinds of Integrated Magnetic Structure of Controllable Reactor of Transformer Type

Steady-state Modeling of Controllable Shunt Reactor of Transformer Type

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

Design of Saturated Coupling Transformer in a New Bridge-type Solid State Fault Current Limiter

Relationship between harmonic coefficients definition and power-step number of controllable reactor of transformer type

General Analytical Model and Optimization for Leakage Inductances of Medium-Frequency Transformers

Study of the Heavy Direct Current Indirect Measurement and Calculation Based on the Waveform Measuring of Valve Currents

Applicability analysis for traditional T-equivalent leakage inductance of three-winding transformer during energization

Numerical Calculation Of The Lightning Transient Voltage Distribution On Converter Transformer Winding Based A Dual Winding Model

A Leakage Inductance Adjustment Model of Hybrid Winding Arrangement Medium Frequency Transformer

Calculation Approach of Reluctance in the Magnetic Circuit of Transformer Employed to Convert into Equivalent Electric Circuit

Distribution Characteristics of Three-Dimensional Leakage Magnetic Field at the Transposition Structure of Transformer Winding

Effect of Winding Transposition Structure on the Distribution of Transverse Leakage Magnetic Field

Design Algorithm for and Validation of Winding Losses in Large-Capacity Medium-Frequency Distribution Transformers