Abstract:Field electron emission properties of carbon nanotube (CNT) paste emitters have been investigated according to binder materials such as acrylic binder, polymethyl methacrylate (PMMA) binder, ethyl cellulose (EC) binder, and graphite binder. Out of the four CNT paste emitters, the graphite binder-based CNT paste emitter demonstrates the best field emission performance, followed by the EC binder, PMMA binder, and acrylic binder in sequence. The obtained result indicates that the field emission properties of the CNT paste emitter are improved with an increase in the electrical conductivity of the binder material. The graphite binder-based CNT paste emitter exhibits a low turn-on field of 3.13 V/μm and a high field emission current density of 882.28 mA/cm2 (corresponding to a current of 50.52 mA) at an applied electric field of 6.7 V/μm. In addition, the graphite binder-based CNT paste emitter shows good emission stability after 10 h of operation with a high initial current density of 122.26 mA/cm2, including a low current degradation rate of 4.84% and a low current fluctuation rate of ±0.59%. The good electron emission stability of the graphite binder-based CNT paste emitter is mainly caused by both the higher electrical conductivity and the higher thermal stability of the graphite binder compared with organic binder materials. The experimental results have shown that the graphite binder-based CNT paste emitter can be widely used in various vacuum electronic devices.

High Emission Performance of Carbon Nanotube Paste Field Emitters Fabricated by Graphite Filler

Field Emission Properties of Point Emitters Fabricated Using Carbon Nanotubes on the Graphite Rod

Improved Field Emission Properties of Carbon Nanotube Paste Emitters Using an Electrically Conductive Graphite Binder

High Emission Current Density, Vertically Aligned Carbon Nanotube Mesh, Field Emitter Array

Field Emission Behavior of Carbon Nanotube Field Emitters after High Temperature Thermal Annealing

High Performance Field Emission from Carbon Nanotube Based Point Emitters

Fabrication of Carbon Nanotube Lateral Field Emitters

Achieving High-Current Carbon Nanotube Emitters

Carbon Nanotubes As Field Emission Sources

Field Emission Characteristics Of Carbon Nanotube Emitters Fabricated By A Filtration-Transfer Method

4.4: High field emission performance from a carbon nanotube fiber

Preparation of Point-type Field Emission Cathode of All Carbon and Enhanced Field Emission Performance by Graphene Fillers

Carbon Nanotubes And Their Potential Field Emission Applications

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Carbon-nanotube Based Paste for Field Emission Display Application

High Performance Field Emission Properties of Graphite Nanoplatelet Field Emitters

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

High Emission Current Density from Printed CNTs by Enhanced Emitters-Substrate Contact

Enhanced Field-Emission Performance from Carbon Nanotube Emitters on Nickel Foam Cathodes

Lateral Field Emitters Fabricated Using Carbon Nanotubes