Abstract:Due to the overloading, vibration, and harsh conditions, switching transistors in open-end winding five-phase permanent magnet synchronous motors (OWFP-PMSMs) drives are more vulnerable to failure. Addressing the increased post-fault current in existing fault-tolerant control (FTC) methods, this article presents an inverter reconstruction approach for the OWFP-PMSM. When transistor failure occurs, the inverter reconstruction approach is achieved by connecting the winding to the midpoint of the bus capacitor. A pattern-based virtual voltage vector synthesis method is introduced to achieve voltage vectors that existing modulation methods cannot synthesize. Then, a hybrid SVPWM strategy is adopted to achieve dual inverter modulation and capacitor voltage compensation in the OWFP-PMSM drive system. The innovation of this article not only enhances the FTC capability of the OWFP-PMSM drive system but also maintains good postfault steady-state performance. Moreover, the amplitude of the postfault phase current resembles that observed during healthy operation, which is a significant reduction compared to the established FTC strategy. Through simulations and experiments, the effectiveness of the proposed method is demonstrated. The results show that the phase current amplitude is reduced by up to 26.5% during steady-state operation compared to the existing method.

Comparative study of remediation methods for open circuit fault in a novel symmetric six-phase fault-tolerant PM machine drives for EVs

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

A Novel Dual Permanent Magnet Fault-Tolerant Vernier Machine with Hybrid Stator Configuration

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Analysis and design of a fault-tolerant six-phase permanent-magnet synchronous machine for electric vehicles

Research on a 20-Slot/22-Pole Five-Phase Fault-Tolerant PMSM Used for Four-Wheel-Drive Electric Vehicles

Harmonic Analysis And Fault-Tolerant Capability Of A Semi-12-Phase Permanent-Magnet Synchronous Machine Used For Evs

Open-Circuit Fault-Tolerant Control of a Six-Phase Asymmetric Permanent Magnet Synchronous Motor Drive System

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

Inverter Reconstruction Approach for Open-End Winding Five-Phase PMSM With Pattern-Based Vector Synthesis and Hybrid SVPWM Modulation

Analysis and design of a six-phase fault-tolerant PM machine used for EVs

Fault-Tolerant Control Strategy with Asymmetric Phase Currents for Single to Four-Phase Open-Circuit Faults of Six-Phase PMSM

Analysis, design and prototyping of a low-speed high-torque six- phase fault-tolerant permanent magnet synchronous machine for EVs

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Fault Tolerant Control of Harmonic Injected Nine-Phase Flux Switching Permanent Magnet Motor Drive System

Research on a four-phase fault-tolerant PMSM used for EVs

Implementation of Postfault Decoupling Vector Control and Mitigation of Current Ripple for Five-Phase Fault-Tolerant PM Machine under Single-Phase Open-Circuit Fault

Comparative Investigations of Inverter Short-Circuit Fault and Winding Terminal Short-Circuit Fault in Open-End Winding Five-Phase PM Machine System

Investigation of a five-phase 20-slot/18-pole PMSM for electric vehicles

Analyze and Design of Six Phase Fault-Tolerant PMSM with Novel Slot Opening Distribution

Investigation Of A Novel 24-Slot/14-Pole Six-Phase Fault-Tolerant Modular Permanent-Magnet In-Wheel Motor For Electric Vehicles