Abstract:Permanent magnet synchronous motors (PMSMs) are widely used in the field of industrial servo control, especially in high-precision applications. Owing to the periodic torque ripple caused by the cogging torque, flux harmonics, and current offsets, the speed output of the system has a periodic ripple, which affects the control accuracy of the servo system. The conventional proportional–integral controllers cannot reject torque ripple and are highly dependent on motor parameters. This limits the control performance when a PMSM is used as a high-precision servo system. Thus, this paper proposes a combination of model predictive control (MPC) and iterative learning control (ILC) to not only speed up the response time of the system but also effectively reduce the speed ripples. MPC updates the predictive model in real time through feedback and evaluates the system output and control rate according to the cost function. It obtains an optimal control sequence for the next moment and has good parameter robustness and fast response. ILC records the speed of ripple signals over an entire cycle and then uses those signals to compensate for the control signal in the next cycle. It is capable of reducing the periodic speed ripples. The experimental verification of the schemes was conducted on a digital signal processor–field programmable gate-array-based platform. The experimental results obtained confirm the effectiveness of the proposed MPC–ILC scheme.

A New Motor Speed Extraction Method Based on the Combination of Smoothing and Polynomial Fitting Filter

Filtering algorithm of speed for PMSM based on incremental Kalman filter

Research on Digital Estimation Method of Motor Speed and Rotor Position

A Novel Filtering Method Based on a Nonlinear Tracking Differentiator for the Speed Measurement of Direct-drive Permanent Magnet Traction Machines

A Speed Estimation Scheme Based on an Improved SOGI-FLL for Speed-Sensorless Control of Induction Motor Drives.

Precise Control for Permanent Magnet Synchronous Motor Based on Kalman Filter

Speed-Sensorless Control of Induction Motor Drives with a STA-FLL Speed Estimation Scheme

Improved High Frequency Signal Injection Method Based on Fundamental Current Extraction for Permanent Magnetic Synchronous Motors

Improved pulsating high-frequency voltage injection with characteristic harmonic elimination

Speed Ripple Minimization of Permanent Magnet Synchronous Motor Based on Model Predictive and Iterative Learning Controls

A Novel Mixed Speed Regulation Method for Permanent Magnet Synchronous Motor with High Precision

Speed Ripple Minimization for PMSM Based on Complex Vector Analysis and Iterative Learning Control

An Improved Rotor Position and Speed Estimation Method for PMSM with Hall Sensors

A Method of Speed Observation Based on Least-Squares Linear-Fitting with Weight Factor

Motor speed estimation method based on second order generalized integrator-frequency locked loop

A New Discretization Method of Full-order Observer for Induction Motor

A Combined Speed Observer Applied in Sensorless Control at Low Speed

Design of Band-Filter Based on Multiple Tracking-Differentiators and Indicated Torque Reconstruction of Diesel Engine

Reduced-Order Extended Observer and Correction Discretization Method for High-Speed Permanent Magnet Synchronous Motor with LCL Filter

Position and Speed Estimation for a Permanent Magnet Synchronous Motor Rotor Using Composite Second Order Generalized Integrator

Design and Implementation of a PMSM Rotor Position Detecting System with High Speed and High Precision