Abstract:This paper proposes a nonlinear flux linkage observer for the PMSM speed controls without motion sensors, introducing the deviation among the real stator flux linkage and an estimated stator flux linkage to suppress feedback and integral flux drift. In the position detection of an interior PMSM without a speed sensor, the traditional back EMF integration method uses a pure integrator, or LPF, to estimate the stator flux. Its inherent defects inevitably lead to inaccurate flux estimation, which directly affects the estimation of the motor mover position, resulting in the decline in motor control operation and the distortion of phase current. This paper uses an improved integrator with adaptive compensation. The projected value of the stator flux linkage has been derived from the estimated value of the rotor permanent magnetic flux linkage position angle and the algebraic model (m-model) of the stator flux linkage, along with a synchronous coordinate system. The IPMSM stator coil flux linkage obtained from the stator coil current and integral voltage models in the static coordinate system is compared to form a feedback closed-loop to suppress the integral drift, and using the cross-product approach of the actual and estimated flux linkage yields the projected value of the IPMSM rotor speed and position through a PLL. Compared with the existing motion-sensorless observers, the methodology proposed in this article is simple and exhibits better dynamic and static estimation performance. Extensive and comprehensive MATLAB computer simulation and experimental findings validate the proposed motion-sensorless control mechanism.

Position and Speed Estimation for a Permanent Magnet Synchronous Motor Rotor Using Composite Second Order Generalized Integrator

Sensorless Control Of Permanent Magnet Synchronous Motors With Compensation For Parameter Uncertainty

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Adaptive Sliding Mode Observer for Speed-Sensorless Control of PMSM

Rotor Speed and Position Estimation Analysis of Interior PMSM Machines in Low and Medium-High Speed Regions Adopting an Improved Flux Observer for Electric Vehicle Applications

An adaptive second-order sliding-mode observer for permanent magnet synchronous motor with an improved phase-locked loop structure considering speed reverse

A Rotor Position and Speed Estimation Method Using an Improved Linear Extended State Observer for IPMSM Sensorless Drives

Speed and Position Estimation for 5-ph PMSM Using SOGI Based on SMO Considering Short-Circuit Fault

Rotor Position Estimation for PMSM Based on Sliding Mode Observer

A Speed Estimation Scheme Based on an Improved SOGI-FLL for Speed-Sensorless Control of Induction Motor Drives.

A New Approach to Estimated Rotor Position for PMSM Based on Sliding Mode Observer

A Second-order Sliding Mode Observer Optimized by Neural Network for Speed and Position Estimation of PMSMs

Rotor Position Estimation for IPMSM Based on Linear Flux

An Improved Full-Order Sliding-Mode Observer for Rotor Position and Speed Estimation of SPMSM

Research on an Improved Sliding Mode Observer for Speed Estimation in Permanent Magnet Synchronous Motor

Optimizing Sensorless Control in PMSM Based on the SOGIFO-X Flux Observer Algorithm

Hybrid Position Observer of IPMSM with Online Rotor Flux Identification

Research of Adaptive Full-Order Sliding Mode Observer in Permanent Magnet Synchronous Generator

An Adaptive Position Observer with Parameters Estimation for Surface-Mount Permanent Magnet Synchronous Motor

Sensorless control in full speed domain of interior permanent magnet synchronous motor based on hybrid observer

New Sliding-Mode Observer for Position Sensorless Control of Permanent-Magnet Synchronous Motor