Abstract:Polyamide (PA) chemistry-based nanofiltration (NF) membranes have an important role in the field of seawater desalination and wastewater reclamation. Achieving an ultrathin and defect-free active layer via precisely controlled interfacial polymerization (IP) is an effective routine to improve the separation efficiencies of NF membranes. Herein, the morphologies and chemical structures of the thin-film composite (TFC) NF membranes were accurately regulated by tailoring the interfacial reaction temperature during the IP process. This strategy was achieved by controlling the temperature (-15, 5, 20, 35, and 50°) of the oil-phase solutions. The structural compositions, morphological variations, and separation features of the fabricated NF membranes were studied in detail. In addition, the formation mechanisms of the NF membranes featuring different PAs were also proposed and discussed. The temperature-assisted IP (TAIP) method greatly changed the compositions of the resultant PA membranes. A very smooth and thin PA film was obtained for the NF membranes fabricated at a low interfacial temperature; thus, a high 19.2 L m-2 h-1 bar-1 of water permeance and 97.7% of Na2SO4 rejection were observed. With regard to the NF membranes obtained at a high interfacial temperature, a lower water permeance and higher salt rejection with fewer membrane defects were achieved. Impressively, the high interfacial temperature-assisted NF membranes exhibited uniform coffee-ring-like surface morphologies. The special surface-featured NF membrane showed superior separation for selected heavy metals. Rejections of 93.9%, 97.9%, and 87.7% for Cu2+, Mn2+, and Cd2+ were observed with the optimized membrane. Three cycles of fouling tests indicated that NF membranes fabricated at low temperatures exhibited excellent antifouling behavior, whereas a high interface temperature contributed to the formation of NF membranes with high fouling tendency. This study provides an economical, facile, and universal TAIP strategy for tailoring the performances of TFC PA membranes for environmental water treatment.

New strategy for structure rearrangement of thin-film composite (TFC) polyamide (PA) membranes and offering potential use in both aqueous and organic solvents

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Sustainable Electrospray Polymerization Fabrication of Thin-Film Composite Polyamide Nanofiltration Membranes for Heavy Metal Removal

Interfacial Polymerization Using Biobased Solvents and Their Application As Desalination and Organic Solvent Nanofiltration Membranes

Water recovery from the high salinity brine: Effect of the interlayer structure in the polyamide nanofiltration membrane

Enhancing thin-film composite polyethersulfone hollow fiber membranes through alkali-induced interfacial polymerization modification for effective separation of monovalent/divalent salts

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Tailoring ultrathin microporous polyamide films with rapid solvent transport by molecular layer-by-layer deposition

A novel wholly-Tröger's Base-based polyamide nanofiltration membrane constructed for the separation application in strong acidic condition via acid-induced segregation

An ultrapermeable thin film composite membrane supported by “green” nanofibrous polyimide substrate for polar aprotic organic solvent recovery

Fabrication of Highly Permeable Polyamide Membranes with Large "Leaf-Like" Surface Nanostructures on Inorganic Supports for Organic Solvent Nanofiltration

Polyamide thin-film composite membrane on polyethylene porous membrane: Fabrication, characterization and application in water treatment

Solvent-activated thin-film nanocomposite membranes molecularly tuned with macrocyclic cavities for efficient water desalination and boron removal

Toward Enhancing Desalination and Heavy Metal Removal of TFC Nanofiltration Membranes: A Cost-Effective Interface Temperature-Regulated Interfacial Polymerization

A Facile Strategy toward the Preparation of a High-Performance Polyamide TFC Membrane with a CA/PVDF Support Layer

Ultrahigh-permeance Polyamide Thin-Film Composite Membranes Enabled by Interfacial Polymerization on a Macro-Porous Substrate Toward Organic Solvent Nanofiltration

Polyamide nanofiltration membrane with high mono/divalent salt selectivity via pre-diffusion interfacial polymerization

PolyMOF Interlayers Modulated Interfacial Polymerization of Ultra-thin Nanofiltration Membranes with Efficient and Stable Desalination Performance

An Efficient Co-Solvent Tailoring Interfacial Polymerization for Nanofiltration: Enhanced Selectivity and Mechanism

Polyamide-Based Ion Exchange Membranes: Cation-Selective Transport through Water Purification Membranes