Abstract:For signal processing of a Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit (IMU), a digital-analog hybrid system-on-chip (SoC) with small area and low power consumption was designed and implemented in this paper. To increase the flexibility of the processing circuit, the designed SoC integrates a low-power processor and supports three startup or debugging modes for different application scenarios. An application-specific computing module and communication interface are designed in the circuit to meet the requirements of IMU signal processing. The configurable clock allows users to dynamically balance computing speed and power consumption in their applications. The chip was taped out under SMIC 180 nm CMOS technology and tested for performance. The results show that the chip's maximum running frequency is 105 MHz. The total area is 33.94 mm2. The dynamic and static power consumption are 0.65 mW/MHz and 0.30 mW/MHz, respectively. When the system clock is 25 MHz, the dynamic and static power consumption of the chip is 76 mW and 66 mW, and the dynamic and static power consumption of the FPGA level are 634 mW and 520 mW. The results verify the superiority of the application specific integrated circuit (ASIC) solution in terms of integration and low power consumption.

Implementation of an Embedded Dual-Core Processor for Portable Medical Electronics Applications

Design and Implementation of 16-bit RISC MCU for Medical Electronics Applications

Ultralow Power Processor Employing Block Instruction for ECG Applications

A highly-integrated biomedical multiprocessor system for portable brain-heart monitoring

An Implementation of a Dual-Processor System on FPGA

Design of an optimized low-latency interrupt controller for IMS-DPU

Embedded MPC Controller Based on Interior‐Point Method with Convergence Depth Control

Design and Implementation of an On-Chip Low-Power and High-Flexibility System for Data Acquisition and Processing of an Inertial Measurement Unit.

PKURS002: a Low Power Microprocessor Core for Embedded System

Low-power SoC design and system implementation for medical applications

Design Of Multithreaded Coprocessor Ip Core For Embedded Soc Chip

Design and Chip Implementation of a Heterogeneous Multi-Core DSP

SecureD: A Secure Dual Core Embedded Processor

A System-on-Chip Solution for Point-of-Care Ultrasound Imaging Systems: Architecture and ASIC Implementation

OS-Level IPC Implementation in Complementary Multi-processor Systems

The design and implement of a mobile security SoC

Design of a Reconfigurable Coprocessor for Double Precision Floating Point Matrix Algorithms

A low-power remotely-programmable MCU for implantable medical devices

A Scalable And Reconfigurable 2.5d Integrated Multicore Processor On Silicon Interposer

A 101.4 GOPS/W Reconfigurable and Scalable Control-Centric Embedded Processor for Domain-Specific Applications

A High Speed Microprocessor Core for the Embedded Applications - Pkurs001