Abstract:In this paper, the large signal operation of the ring oscillator based injection locked frequency divider is analyzed considering the trade-offs among the operating frequency, locking range and power consumption. A large signal model is used to reveal several key findings such as voltage-limited locking ranges and asymmetry between the upper and lower locking bands. They are applied to the optimize the dividers maintaining a good balance among design considerations. Several prototypes, including the divide-by-2 with 3 and 5 stages of inverters, divide-by-3 and divide-by-5, are implemented in a standard 0.18 µm CMOS technology to verify the operation under a large injected signal. As an extension, dual-modulus prescalers are further designed by the integration of switches for different ways of signal mixing. Measurements results show the proposed divide-by-2/3 unit and a divide-by-8/9 with this unit are able to work up to 8 GHz and 4.0 GHz with maximum power consumption of 0.7 mW and 1.5 mW respectively.

Analysis of Nonlinearities in Injection-Locked Frequency Dividers

A Dual-Mode Mm-Wave Injection-Locked Frequency Divider with Greater Than 18% Locking Range in 65nm CMOS

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

200Ghz CMOS Prescalers with Extended Dividing Range Via Time-Interleaved Dual Injection Locking

Gigahertz range injection locked frequency dividers with band-width enhancement and supply rejection

A Reliability-Oriented Startup Analysis of Injection-Locked Frequency Divider Based on Broken Symmetry Theory

Design and optimization of the ring oscillator based injection locked frequency dividers.

Optimization of Injection Locked Frequency Divider with Tunable Active Inductor

19.1 GHz 18 Mw Divide-by-3 Heterodyne Injection Locking Frequency Divider in 0.18 Μm CMOS Technology

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A 3 Mw 54.6 GHz Divide-by-3 Injection Locked Frequency Divider with Resistive Harmonic Enhancement

Injection-Locking-Based Power and Speed Optimization of Cml Dividers

6.2 GHz 0.5 Mw Two‐dimensional Oscillator Array‐based Injection‐locked Frequency Divider in 0.18 Μm CMOS

Understanding Dynamic Behavior of Mm-Wave CML Divider with Injection-Locking Concept.

Bandwidth-Related Optimization in High-Speed Frequency Dividers Using Sige Technology

Noise Analysis in Injection Locked Frequency Divider Using Frequency Modulation

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

Cmos Prescaler(S) With Maximum 208-Ghz Dividing Speed And 37-Ghz Time-Interleaved Dual-Injection Locking Range

Sub-mW Multi-Ghz CMOS Dual-Modulus Prescalers Based on Programmable Injection-Locked Frequency Dividers

A 150ghz Injection-Locked Frequency Divider with 19.8% Locking Range Based on Adjustable Inductor Tuning Method in 65-Nm CMOS

A low-voltage differential injection locked divider with forward body bias