Abstract:In some occasions, high accuracy and real-time 6-degree-of-freedom (6-DOF) displacements should be measured so that the control system can regulate the X-Y stages' attitude in real time. The accuracy and real-time property of measurement's result depend on not only the sensors itself, but also the accuracy and effort of the computational algorithm using the sensors' measured data. As the relation between sensors' measured data and displacements is immensely complex and usually described as strong nonlinear coupling equation when 6-DOF displacements are all considered, computational accuracy and effort are difficult to be ensured simultaneously. This paper designs a 6-DOF displacements' measurement setup for X-Y stages based on nine interferometers' additional information, and derives the corresponding computational algorithm. For rotation, its range is usually very small and high accuracy computational results can be obtained using two interferometers' differential computation; for translation, the closed form solutions without rotational displacement's computational error's transmission are derived by making full use of all additional interferometers' information, so that the computational accuracy can be ensured. In addition, the algorithm has simple form and doesn't involve iteration and transcendental function's computation, so that it helps real-time computation. This algorithm can acquire the computational accuracy of 10(-15) rad and 10(-13) mm for rotational and translational displacement separately, which can be seen in the simulation result for a lithography's wafer stage. (C) 2013 Elsevier Inc. All rights reserved.

Use of Two Planar Gratings to Measure 3-DOF Displacements of Planar Moving Stage.

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

3D Measurement System Based on Computer-Generated Gratings

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

High-precision 2D grating displacement measurement system based on double-spatial heterodyne optical path interleaving

A New Method Using Orthogonal Two-Frequency Grating in Online 3d Measurement

On-line Three-Dimensional Inspection Using Randomly Phase-Shifting Fringe Based on Least-Square Iteration

Position and Out-Of-Straightness Measurement of A Precision Linear Air-Bearing Stage by Using A Two-Degree-Of-Freedom Linear Encoder

A New 6-Degree-of-freedom Measurement Method of X-Y Stages Based on Additional Information

Optical Sensors for Multi-Axis Angle and Displacement Measurement Using Grating Reflectors

Three-degrees-of-freedom Precision Stage

Five-Degrees-Of-Freedom Measurement System Based on A Monolithic Prism and Phase-Sensitive Detection Technique

3DOF displacement sensor based on the self-imaging effect of optical micro-gratings

Uniaxial 3D Measurement with Auto-Synchronous Phase-Shifting and Defocusing Based on a Tilted Grating

Six Degrees of Freedom Displacement Measurement System for Wafer Stage Composed of Hall Sensors

Measurement of Six-Degree-Of-Freedom Planar Motions by Using A Multiprobe Surface Encoder

A three-degrees-of-freedom motion error measurement system based on Mach–Zehnder interferometry