Abstract:Background: Vibration signature acquired from a gear mesh can be used to identify the defect present in a gear mesh hence can be used to diagnose the condition of a gear mesh. But the signal acquired from the subject may not be noise free and may be non stationary. Methods: Before going for the analysis of the acquired signal a preprocessing on the acquired signal is required to make it noise free. In the present work in first phase, the acquired vibration signal is filtered to reduce the noise and to improve the SNR (signal to noise ratio). The filtering is done by an Adaptive Noise Cancellation (ANC) technique. A modified Leaky Least Mean Square (LLMS) based adaptive algorithm along with a digital filter is used to achieve the ANC. The signal acquired from a healthy gear is used as the reference signal for the adaptive filter based de-noising process. In the second phase of the present work Adaptive Wavelet Transform (AWT) is used to detect the fault by extracting the features from the filtered vibration signal. From the signal pattern the adaptive wavelet is designed. The adaptive wavelet scalogram is compared with the standard wavelet scalogram. Results: The result shows that the adaptive wavelet scalogram is better in analyzing the vibration signal. In this work a gear drive experimental set-up is made. Two different types of defective gears are used for the experiment. In type-1 defective gear one tooth is broken and in type-2 defective gear two teeth are broken. Initially, the vibration signal is acquired from a healthy gear which is used as the reference signal. Then the vibration signal from type-1 defective gear and type-2 defective gear is acquired and processed for the analysis and to identify the defects. Conclusion: The present work shows that with the application of modified-LLMS algorithm and AWT the proposed technique of signal processing is more suitable for the fault identification and hence for the condition monitoring of the gear.

The application of wavelet finite element method on multiple cracks identification of gear pump gear

On Fault Feature Extraction of a Gear by Complex Morlet Wavelet Transform and Coefficient Correlation

Application of Morphological Wavelet De-noising in Extracting Gear Fault Feature

Crack Identification of the Sprocket Wheel in Sintering Machine Based on Wfem

Gear Fault Diagnosis of Wind Turbine Based on Discrete Wavelet Transform

Fault diagnosis of gearbox based on RBF-PF and particle swarm optimization wavelet neural network

A novel method for gear crack fault diagnosis using improved analytical-FE and strain measurement

Condition Monitoring Approach for Wear Recognition in Gear Pump

Assessment of Mechanical Crack Fault Dependent on Wavelet Finite Element Model

Fault Detection of Gearbox by Linear Combination of Adaptive Wavlets

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

The Fault Diagnosis For The Screw Rotor Of The Single Screw Compressor Based On Wavelet Finite Element Method

Fault Signal Simulation and Service Condition Monitoring of Cracked Gear System

Gear Crack Assessment Based on Cyclic Correlation Analysis

Modeling and fault identification of the gear tooth surface wear failure system

A Meshing Resonance Based Demodulation Algorithm and Its Application for Planet Gear Tooth Root Crack Detection

Application of Cyclic Spectral Analysis to Gear Crack Assessment

Gearbox Fault Diagnosis Using Time-Wavelet Energy Spectral Analysis

Fault Diagnosis of Gearbox Based on Hilbert and Wavelet Transform

Application of Adaptive Wavelet Transform for Gear Fault Diagnosis Using Modified-LLMS Based Filtered Vibration Signal

Research on Identification Method of Wear Degradation of External Gear Pump Based on Flow Field Analysis