Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Numerical simulation of effective turbulent heat transfer at transverse streamlining of a rod bundle

Direct numerical simulation of turbulent mixed convection in a vertical channel in a wall-normal magnetic field

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

Convective Heat Transfer Coefficient for a Rod-Like Particle in a Uniform Flow

Direct numerical simulation of turbulent heat transfer in an axially rotating pipe flow

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

Numerical Investigation on Heat Transfer Characteristics of Liquid Metal Cross Flow over Tube Bundles

Numerical Study On Low Reynolds Number Heat Transfer In Alternating Elliptical Axis Tube

Numerical simulations of heat transfer in plane channel flow

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids

Towards Direct Numerical Simulation of a 5x5 Rod Bundle

Numerical and experimental analysis of magneto-convective flows around pipes

Numerical simulation of a low Prandtl number flow with a four-parameters turbulence model through an explicit algebraic definition of Reynolds stress and turbulent heat flux

Turbulence budgets and statistics analysis of mixed convection liquid metal flow in horizontal channel using DNS

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Conjugated Heat Transfer Simulation of a Fin-and-Tube Heat Exchanger

Numerical Simulation of Heat Transfer Characteristics of Supercritical Water in 2 × 2 Bundles

Innovative simplified approach and numerical investigation for flow and heat transfer in internally threaded tubes

Numerical Estimation of Heat Transfer Characteristics for Two-Row Plate-Finned Tube Heat Exchangers with Experimental Data