Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

3D printing of continuous fiber reinforced diamond cellular structural composites and tensile properties

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D printing of continuous fiber reinforced cellular structural composites for the study of bending performance

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Evaluation of Carbon Fiber-Embedded 3D Printed Structures for Strengthening and Structural-Health Monitoring

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

A novel dual-nozzle 3D printing method for continuous fiber reinforced composite cellular structures

Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review

3D Printed Continuous Fibre Reinforced Composite Corrugated Structure

Novel Designable Strategy and Multi-Scale Analysis of 3D Printed Thermoplastic Fabric Composites

Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous Fiber Reinforced Cement-Based 3D Printed Composites

Mechanical properties and damage failure of 3D‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core

Strain rate dependence of 3D printed continuous fiber reinforced composites

Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites

Effect of infill density and reinforced perimeters on tensile properties and fracture mechanism of 3D printing carbon fiber–reinforced composite

Evaluation and Prediction of Tensile Properties of 3d‐printed Continuous Carbon/kevlar Fiber‐filled Composites by Coaxial Hybrid Process

Controllable Inter-Line Bonding Performance and Fracture Patterns of Continuous Fiber Reinforced Composites by Sinusoidal-Path 3D Printing

Design and 3D Printing of Continuous Fiber Reinforced Heterogeneous Composites

3D Printed Continuous Fiber Reinforced Composite Auxetic Honeycomb Structures