Abstract:Sr5(PO4)2SiO4:Eu2+ phosphosilicate phosphor was prepared by high temperature solid-state reaction. Effects of strontium sources (strontium oxide, strontium nitrate and strontium carbonate) and of phosphorus sources (diammonium phosphate, strontium monophosphate) on the reactivity of their mixture during heating and on phase composition, morphology and photoluminescence excitation and emission properties of the phosphors were investigated by TG–DTG–DSC, XRD, SEM and photoluminescence spectroscopy. The sequence of the solid-state reactions when using the different starting reagents was discussed based on the TG–DTG–DSC results. It was found that it is hard to prepare pure Sr5(PO4)2SiO4:Eu2+ phosphor with either of strontium sources studied when stoichiometric (NH4)2HPO4 was used as a phosphorus source. Minor Sr2SiO4 impurity phase was present in the phosphors. The content of impurity phase, the morphology and resultant photoluminescence properties of the phosphors were markedly influenced by the strontium source employed. When SrCO3 was used as the strontium source, the phase purity of the phosphor was improved with the addition of excess (NH4)2HPO4. When (NH4)2HPO4with 5% excess or SrHPO4 in stoichiometric ratio was used as the phosphorus source a pure phase phosphor was obtained. In addition, the morphology and photoluminescence of the phosphor were also influenced by phosphorus source. The possible reasons causing different properties of the phosphors prepared using different raw materials were discussed based on reaction schemes.

A new method for preparing cubic-shaped Sr2MgSi2O7: Eu2+, Dy3+ phosphors and the effect of sintering temperature

Synthesis of long afterglow white phosphor Sr_2MgSi_2O_7:Dy~(3+) and MgSiO_3:Dy~(3+)

Micro-spherical MAl2O4: Eu2+ (m=ca; Sr) Phosphors: Fast Sol-Gel Route to Monodisperse Size Distribution and Monoclinic Lattice Structure to High Efficiency

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Effect of Mixing Process on the Luminescent Properties of SrAl2O4:Eu2+, Dy3+ Long Afterglow Phosphors

New Preparation Process of Long Afterglow Phosphor Eu and Dy Co-doped SrAl2O4

Preparation of SrAl2O4:Dy,Eu phosphor by sol-gel processing and its luminescent properties

The Phase Transition of Color-Tunable Long Afterglow Phosphors Sr 1.94−x Ba X MgSi 2 O 7 :Eu2+0.01,

Preparation and Characterization of Sr2-x-yCaxMgyAl2SiO7∶ Eu2+

Synthesis of SrAl2O4:Eu, Dy Phosphor Nanometer Powders by Sol–gel Processes and Its Optical Properties

Preparation and Characterization of Long Afterglow M2mgsi2o7-Based (M : Ca, Sr, Ba) Photoluminescent Phosphors

Preparation of the Ultrafine SrAl2O4:Eu,Dy Needle-Like Phosphor and Its Optical Properties

Preparation of Sral2o4 : Dy,Eu Phosphor by Sol-Gel Processing and Its Luminescent Properties

Effect of the Sintering Process on the Structure, Colorimetric, Optical and Photoluminescence Properties of SrWO4 Phosphor Powders

Luminescence properties and energy transfer study of color temperature tunable CaSrSiO4:Dy3+,Eu3+ white phosphors

Effect of strontium and phosphorus source on the structure, morphology and luminescence of Sr5(PO4)2SiO 4:Eu2+phosphor prepared by solid-state reaction

Preparation of long-afterglow Sr4Al14O25-based luminescent material and its optical properties

Improvable luminescent properties by adjusting silicon–calcium stoichiometric ratio in long afterglow phosphors Ca 1.94 MgSi 2 O 7 : Eu2+0.01, Dy3+0.05

Effects of synthesis temperature and Eu2O3 concentration on the crystalline phases and photoluminescence properties of SrAl2O4 phosphors

Preparation and Luminescent Properties of SrAl2O4:Eu2+, Dy3+ Phosphor Via a Flux-Coprecipitation Method

Preparation of Different Al2O3/SrO Phosphors Doped Rear Earth Ions and Their Properties