Abstract:Recently, the interconnection bandwidth of the data center is rapidly increasing. To satisfy the requirement for the high-performance data center, a 4-channel 2.5D silicon photonic transmitter is proposed and the packaging structure could increase the high-density scalability of the architecture for 1.6T3.2T co-packaging optics (CPO) module. The electrical driver and silicon photonic Mach-Zehnder modulator (MZM) are mounted to the silicon interposer by the micro-bumps. Meanwhile, the silicon interposer is mounted to the low temperature co-fired ceramic by the solder balls. The 2.5D transmitter is assembled to the motherboard by the high-speed ball grid array (BGA) connector to make it convenient to be replaced. The electrical optimization is implemented to make the insertion loss of the whole passive link within 1.55 dB under 40 GHz, which ensures the transmitter with the socket transmit the clear simulated eye diagram at 64 Gbps PAM4 rate per channel. Moreover, the thermal evaluation is performed, which includes the heat- dissipation evaluation and the thermal-induced impact on the edge light coupling. Finally, the substrates in the 2.5D transmitter are fabricated and the transmitter is realized by the improved assembly method. By the verification of the measurement, the 2.5D transmitter we proposed could work at 64 Gbps PAM4 signal transmission rate per channel with the 6pJbit power consumption. Regardless of the bandwidth of the electronic integrated circuit (EIC)MZM and the BGA connector, based on the simulation electrical bandwidth, it is potential for realizing 100 Gbps PAM4 signal transmission.

Dual use driver for high speed links transmitters in the future high energy physics experiments

Test bench of a 100 Gbps radiation hardened link for future particle accelerators

D-band CMOS Transmitter and Receiver for Multi-Giga-bit/sec Wireless Data Link

A Kind of High Bit Rate Laser Diodes Driver

A 10 Gbps Driver/Receiver ASIC and Optical Modules for Particle Physics Experiments

A 10-Gb/s Driver/Receiver ASIC and Optical Modules for Particle Physics Experiments

Prototyping of a 25 Gbps Optical Transmitter for Applications in High-Energy Physics Experiments

A Radiation-Tolerant 25.6-Gb/s High-Speed Transmitter in 28-nm CMOS With a Tolerance of 1 Grad

Modulator-Based, High Bandwidth Optical Links for HEP Experiments

Developments of Two High-speed Dual-channel VCSEL Driver ASICs

Optimization of PAM-4 transmitters based on lumped silicon photonic MZMs for high-speed short-reach optical links

Design and Realization of Multi-Channel and High-Bandwidth 2.5D Transmitter Integrated With Silicon Photonic MZM

Low-cost High-Speed Rapidly Reconfigurable Integrated Half-Duplex Optical Transceiver Front-End

High-Speed DD Transmission Using a Silicon Receiver Co-Integrated with a 28-Nm CMOS Gain-Tunable Fully-Differential TIA

A 20 Gbps PAM4 Data Transmitter ASIC for Particle Physics Experiments

A 40 Gbps Optical Transceiver for Particle Physics Experiments

Beyond 300gb/s from an Integrated Single-Channel Silicon Photonics Modulator Driver Combination

Compact Frontend-Electronics and Bidirectional 3.3 Gbps Optical Datalink for Fast Proportional Chamber Readout

A 32Gb/s-NRZ, 15GBaud/s-PAM4 DFB laser driver with active back-termination in 65nm CMOS

Up to 170Gbaud Optical Interconnects with Integrated CMOS-Silicon Photonics Transmitter

A High-Speed 130-nm SiGe BiCMOS Integrated Duobinary Driver for Data Rate Capacity Enhancement in VCSEL-Based Optical Links