Abstract:Thanks to wavelength flexibility, interferometric filters such as Fabry-Perot interferometers (FPIs) and field-widened Michelson interferometers (FWMIs) have shown great convenience for spectrally separating the molecule and aerosol scattering components in the high-spectral-resolution lidar (HSRL) return signal. In this paper, performance comparisons between the FPI and FWMI as a spectroscopic discrimination filter in HSRL are performed. We first present a theoretical method for spectral transmission analysis and quantitative evaluation on the spectral discrimination. Then the process in determining the parameters of the FPI and FWMI for the performance comparisons is described. The influences from the incident field of view (FOV), the cumulative wavefront error induced by practical imperfections, and the frequency locking error on the spectral discrimination performance of the two filters are discussed in detail. Quantitative analyses demonstrate that FPI can produce higher transmittance while the remarkable spectral discrimination is one of the most appealing advantages of FWMI. As a result of the field-widened design, the FWMI still performs well even under the illumination with large FOV while the FPI is only qualified for a small incident angle. The cumulative wavefront error attaches a great effect on the spectral discrimination performance of the interferometric filters. We suggest if a cumulative wavefront error is less than 0.05 waves RMS, it is beneficial to employ the FWMI; otherwise, FPI may be more proper. Although the FWMI shows much more sensitivity to the frequency locking error, it can outperform the FPI given a locking error less than 0.1 GHz is achieved. In summary, the FWMI is very competent in HSRL applications if these practical engineering and control problems can be solved, theoretically. Some other estimations neglected in this paper can also be carried out through the analytical method illustrated herein.

Compact Middle-Wave Infrared Fabry-Perot Interferometer with Double Metallic Subwavelength Gratings

Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

Photonic Microwave Transversal Filter Employing A Fiber-Bragg-Grating-Based Multiple Resonator

Enhanced Dual-Band Infrared Absorption in a Fabry-Perot Cavity with Subwavelength Metallic Grating.

A Pressure-tuned Field-widened Michelson Interferometer System As the Spectroscopic Filter of High-Spectral-resolution Lidar

Comparisons Between Field-Widen Michelson Interferometer and Fabry-Perot Interferometer As the Spectroscopic Filter in High Spectral Resolution Lidar

Micro-scale Fabry–Perot Interferometer with High Spectral Resolution and Tunable Transmission Frequency Via Chiral Waveguide-Emitter Coupling

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

Non-polarized and Ultra-Narrow Band Filter in MIR Based on Multilayer Metasurface

Tunable Fabry-Perot Interferometer Designed for Far-Infrared Wavelength by Utilizing Electromagnetic Force

Optimizing the Efficiency of Fabry-Perot Interferometers with Silicon-Substrate Mirrors

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.

Exploring the Efficacy of Subwavelength Gratings As Short-Wavelength Infrared Filters

Terahertz Fabry-Perot Interferometer Constructed by Metallic Meshes with Micrometer Period and High Ratio of Linewidth/Period

Design and Fabrication of an Integrated Dual-Channel Thin-Film Filter for the Mid-Infrared

Miniature Fabry-Perot interferometric sensor for temperature measurement based on photonic crystal fiber

A novel mid-infrared thermal emitter with ultra-narrow bandwidth and large spectral tunability based on the bound state in the continuum

Chirped Fiber Tip Fabry-Perot Interferometer.

Tunable mid-wave infrared Fabry-Perot bandpass filters using phase-change GeSbTe

The Optimization Design of Broadband Mid-Ir Grating

All-mirror wavefront division interferometer for mid-infrared spectrometry