Abstract:High-resolution and high-sensitivity molecular spectroscopy is widely used in fundamental molecular physics, atmospheric studies, remote sensing, industrial process monitoring, and medical diagnostics. Accurate determination of the parameters of molecule absorption lines, such as line positions, line strengths, line widths and profiles, is essential to support these studies and applications. For example, in order to retrieve the column density of carbon dioxide with a precision of one part per million (ppm), we need laboratory data of line positions with a uncertainty lower than 0.3 MHz and line intensities with a relative accuracy better than 0.5%. Here we present precision spectroscopy of molecules using a laser locked with a high-finesse cavity. The cavity made of invar is thermo-stabilized to reduce the drifts of its length and the cavity mode frequencies. The frequency of the probe laser is locked on a longitudinal mode of the cavity by using the Pound-Drever-Hall method. Another beam from the probe laser, which is frequency shifted and on resonance with a nearby longitudinal mode of the cavity, is used for cavity ring-down spectrum (CRDS) measurement. The CRDS absorption spectrum is recorded by stepping the modulation frequency of a fiber electro-optic modulator in increment of the mode spacing of the cavity. Note that the cavity mode frequencies are shifted due to the dispersion introduced by the absorption lines. Prior to the CRDS measurements, the transmittance spectra of the cavity modes are recorded by scanning the probe laser frequencies over the resonance, which allows the determination of the cavity mode frequencies with an accuracy at a Hz level. Therefore, a dispersion spectrum is also obtained using the same setup by measuring the frequency shifts of cavity modes of the samples with and without absorption. The absolute frequency of the probe laser is determined by an optical frequency comb referring to a GPS-disciplined rubidium clock. The long term drift of beat frequency between the optical frequency comb and the probe laser is measured to be about 1.8 MHz per hour, which is consistent with the thermal expansion of the cavity under a temperature drift of 50 mK. The performance of the spectrometer is demonstrated by measuring the Doppler-broadened spectra of CO2 around 6470.42 cm-1. Precise spectroscopic parameters are derived from both the absorption and dispersion spectra recorded by the same spectrometer. The line position is determined with an accuracy of 0.18 MHz, which is over one order of magnitude better than those given in previous studies and spectral databases.

Laser-locked, Continuously Tunable High Resolution Cavity Ring-Down Spectrometer.

Cavity Ring-Down Spectroscopy of Doppler-Broadened Absorption Line with Sub-Mhz Absolute Frequency Accuracy

Research and Data Processing of Double Locked Cavity Ringdown Absorption Spectroscopy

C Plus L-band Tunable Sub-Khz Linewidth Single Frequency Fiber Laser by Combining a Fiber Sub-Ring with a Saturable Absorber

Ultrasensitive, self-calibrated cavity ring-down spectrometer for quantitative trace gas analysis.

Continuous wave cavity ringdown spectroscopy incorporating with an off-axis arrangement, white noise perturbation, and optical re-injection

Measurement of Molecular Absorption Spectrum with Alaser Locked on a High-Finesse Cavity

Ultrasensitive Near-Infrared Cavity Ring-Down Spectrometer for Precise Line Profile Measurement

A very sensitive CW cavity ring-down spectrometer and its application]

Comb-locked Cavity Ring-Down Saturation Spectroscopy.

A stabilized laser continuously tunable over a range of 1.5 GHz

Frequency-Stabilized Mid-infrared Laser Source for Precision Spectroscopy

Locking Multiple Wavelength Lasers to the Transition of Cesium Atoms by Using a Fabry-Pérot Transfer Cavity

A Wide-Range and Calibration-Free Spectrometer Which Combines Wavelength Modulation and Direct Absorption Spectroscopy with Cavity Ringdown Spectroscopy

Cavity ring-down spectroscopy with a laser frequency stabilized and locked to a reference target gas absorption for drift-free accurate gas sensing measurements

A rigid, monolithic but still scannable cavity ring-down spectroscopy cell

Comb-locked Cavity-Assisted Double-Resonance Molecular Spectroscopy Based on Diode Lasers

Infrared intracavity laser absorption spectroscopy with a continuous-scan Fourier-transform interferometer.

Mid-infrared cavity ring-down spectroscopy using DFB quantum cascade laser with optical feedback for radiocarbon detection

Uncertainty of optical feedback linear cavity ringdown spectroscopy