Abstract:This paper presented a silica-based 1 X 8 optical power splitter at 0.85 mum designed with Multi Mode Interference (MMI). The waveguide material is Si-based SiO2 doped with Ge and deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) method. The refractive index of glass substrate is 1.458, and the index difference is 0.75%. The input and output waveguides are optimized considering the characteristics of VCSEL (Vertical Cavity Surface Emitting Lasers). The core pitch on this chip is chosen as 250 mum to take the fiber connections into account, and the typical cladding diameter of optical fibers as 125 mum. The critical parameters in the fabrication of the MMI power splitter are the multimode section width and length. In general the key performance specifications of the optical power splitter are insertion loss and uniformity. We use a Finite Difference Beam Propagation Method (FDBPM) to simulate accurately the evolution of the fundamental mode power of the input guide incoming to the device, and analyze the relationships of various parameters in detail. The bend output waveguides are sin-bend styles. Compared with the commercial optical power splitter, the simulation results accord with the requirement of our design, containing compact size, low loss, stable splitting ratio, low crosstalk, large optical bandwidth, and good fabrication tolerances. The insertion loss and the uniformity of pilot study are 9.07 dB and 0.02 dB respectively.

Sub-μm2 Power Splitters by Using Silicon Hybrid Plasmonic Waveguides.

Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

Fabrication of A Multimode-Interference-Based Multimode Power Splitter in Glass

Efficient coupling between dielectric and hybrid plasmonic waveguides by multimode interference power splitter

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

A Hybrid Plasmonic Multimode Interference Splitter Based on Metal-Gap-Silicon Waveguides

Nanoplasmonic Power Splitters Based On The Horizontal Nanoplasmonic Slot Waveguide

Ultra-Broadband and Low-Loss Silicon-Based Power Splitter Based on Subwavelength Grating-Assisted Multimode Interference Structure

A Compact Ultrabroadband Polarization Beam Splitter Utilizing a Hybrid Plasmonic Y-Branch

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Ultra-compact and broadband all-silicon TM-pass power splitter using subwavelength holey-structured metamaterial waveguides

Compacted Splitter Based On The Interlaced Metallic Particle Arrays

Ultra-compact dual-mode silicon power splitter using sub wavelength gratings couplers

Design and study of 0.85-µm wavelength-based MMI optical power splitter

Ultracompact and Large-Scale Power Splitters on Silicon-Based Two-Dimensional Photonic Crystals at Near-Infrared Wavelengths

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Ultracompact and Broadband Silicon-Based TE-pass 1 × 2 Power Splitter Using Subwavelength Grating Couplers and Hybrid Plasmonic Gratings.

Design And Study Of Wavelength 0.85 Mu M-Based Mmi Optical Power Splitter

Ultra-broadband 3 Db Power Splitter from 1.55 to 2 Μm Wave Band

Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

Ultra-Broadband Dual-Polarization Power Splitter Based on Silicon Subwavelength Gratings