Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

Note: Measurement Method For Sound Velocity Of Melts In Large Volume Press And Its Application To Liquid Sodium Up To 2.0 Gpa

Research Progress on Ultrasonic Velocity Measurement of Liquid Materials under High Pressure

Note: an Anvil-Preformed Gasket System to Extend the Pressure Range for Large Volume Cubic Presses.

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

A method for simultaneous measurements of compressional wave and shear wave velocities in rocks and minerals at high pressure and high temperature: A modification to the combined transmission-reflection method

The Velocity and Elastic Constants in Fluid Oxygen under High Pressures and High Temperature

Use of molybdenum as a pressure calibrant in a cubic press and sound velocity measurement of tungsten to 5 GPa

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Modification to the Newton-Laplace Formula of Sound Velocity at High Pressure

In Situ Brillouin Scattering Study of Water in High Pressure and High Temperature Conditions

The Velocity, Refractive Index, and Equation of State of Liquid Ammonia at High Temperatures and High Pressures.

The Acoustic Velocity, Refractive Index, and Equation of State of Liquid Ammonia Dihydrate under High Pressure and High Temperature

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Sound Velocity Variations and Melting of Vanadium under Shock Compression

Equation of State of Liquid Bismuth and Its Melting Curve from Ultrasonic Investigation at High Pressure

A new method for nondestructively measuring pressure based on the Rayleigh wave

Expanding the Pressure Frontier in Grüneisen Parameter Measurement: Study of Sodium Chloride

Thermodynamic properties of aqueous sodium sulfate solutions to 773 K and 3 GPa derived from acoustic velocity measurements in the diamond anvil cell

Experimental and Theoretical Studies on the Elasticity of Molybdenum to 12 GPa

The development of internal pressure standards for in-house elastic wave velocity measurements in multi-anvil presses