Abstract:Solution-processed polymeric semiconductor films are attracting wide interest for applications in flexible electronics, wherein environmental stability is still a big obstacle. In many polymeric thin-film electronic devices, vertical phase separation has been observed, which leads to film depth dependences of electronic properties. Here, a soft plasma-assisted surface etching method to improve the environmental stability and maintain the electronic properties of organic field-effect transistors (OFETs) is proposed, by which the unwanted thin-film surface (exposed to air) is selectively taken away upon soft plasma etching, and the layer beneath the surface (subsurface) is preserved without any damage to the subsurface's structure or electronic function. Investigation of frequently used polymeric semiconductors poly(3-hexylthiophene) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4b′]dithiophen-2-yl)-alt [1,2,5]thiadiazolo[3,4-c]pyridine] shows that the crystallinity of the surface layer is higher than that of the subsurface layer. However, for p-type polymeric semiconductors, higher crystallinity usually leads to a lower ionization energy and higher doping concentration during exposure to air and thus a higher background conductivity, deteriorating the switching-off capability of the organic field-effect transistors (OFETs). Therefore, by removing this surface layer, the lifetime of OFETs in air is effectively increased by over 50%.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.1c00628?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.1c00628</a>.Transfer curves ((−ID)1/2–VG) for unetched and etched P3HT transistors; output curves of unetched and etched P3HT transistors; on/off ratio and field-effect mobility of unetched and etched P3HT transistors; transfer curves of PCDTPT transistors measured in different conditions; transfer curves ((−ID)1/2–VG) for unetched and etched PCDTPT transistors; VON, field-effect mobility and SS–1 of unetched and etched PCDTPT transistors; output curves of unetched and etched PCDTPT transistors; schematic diagram and transfer curve PCDTPT transistor (etched before the deposition of electrodes); dual sweep transfer and output curves of P3HT and PCDTPT transistors; the effect of thickness on PCDTPT transistors performance; the effect of encapsulation on PCDTPT transistors performance; and the effect of crystallinity on DPP-DTT transistors performance (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.1c00628/suppl_file/cm1c00628_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High Performance Polymer Field-Effect Transistors Based on Thermally Crosslinked Poly(3-Hexylthiophene)

Poly(3-hexylthio) Thiophene Field-effect Transistor Device Performance: Impact of the Content of Hexylthio Side Chain on Backbone

High-performance, stable organic field-effect transistors based on trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene

Enhanced Solvent and Thermal Stability in Cross‐Linkable Conjugated Statistical Copolymers for Organic Field‐Effect Transistors

Interfacial Engineering for High-Performance DPPT-TT Polymer Transistors with the On/Off Ratio of 108 and Mobility of 3 Cm2v−1s−1

Copolymers of Benzo[1,2-B:4,5-B′]dithiophene and Bithiazole for High-Performance Thin Film Phototransistors

Improvement of the poly-3-hexylthiophene transistor performance using small molecule contact functionalization

Enhanced performance of field-effect transistors based on C 60 single crystals with conjugated polyelectrolyte

Thickness Dependent Thermal Performance of a Poly(3,4-Ethylenedioxythiophene) Thin Film Synthesized Via an Electrochemical Approach

Surface Etching of Polymeric Semiconductor Films Improves Environmental Stability of Transistors

High-performance Semiconducting Polythiophenes for Organic Thin-Film Transistors.

A nonchlorinated solvent-processed polymer semiconductor for high-performance ambipolar transistors

Reduced Contact Resistance in Solution-Processed Phenylenevinylene-Based Copolymer Thin-Film Transistors Using Annealing-Induced Morphological Variation

Tuning the Charge‐Transport Property of Pyromellitic Diimide‐Based Conjugated Polymers Towards Efficient Field‐Effect Transistors

Synthesis of a Conjugated Polymer with Broad Absorption and Its Application in High-Performance Phototransistors

Organic Transistors Based on Highly Crystalline Donor–Acceptor π-Conjugated Polymer of Pentathiophene and Diketopyrrolopyrrole

A High-Mobility Electron-Transport Polymer with Broad Absorption and Its Use in Field-Effect Transistors and All-Polymer Solar Cells

Influence of thin-film processing on the performance of organic field-effect transistors

High-performance polymer field-effect transistors: from the perspective of multi-level microstructures

Suppressing off -state current via molecular orientation in submicrometer polymer field-effect transistors

Poly(pentacyclic lactam-alt-diketopyrrolopyrrole) for field-effect transistors and polymer solar cells processed from non-chlorinated solvents