Abstract:Ultrasonic backscatter has been gradually applied to the assessment and diagnosis of bone disease. The heavy frequency-dependent attenuation of ultrasound results in weak ultrasonic signals with poor signal-to-noise ratio and serious wave distortions during propagation in cancellous bone. Ultrasonic attenuation measured with the through-transmission method is an averaged result of ultrasonically interrogated tissues (including the soft tissue, cortical bone and cancellous bone). Therefore, the through-transmission measurements can not accurately provide ultrasonic attenuation of cancellous bone of interest. The purpose of this study is to estimate ultrasonic frequency-dependent attenuation with ultrasonic backscatter measurements and to compensate for the frequency-dependent attenuation in an ultrasonic backscatter signal from cancellous bone. In-vitro ultrasonic backscatter and through-transmission measurements are performed on 16 cancellous bone specimens by using 1.0-MHz transducers. Spatial scans are performed in a 10 mm × 10 mm scanned region with a spatial interval of 0.5 mm for each bone specimen. The frequency slope of ultrasonic attenuation is measured with the ultrasonic through-transmission signals serving as a standard value. Four different algorithms (the spectral shift method, the spectral difference method, the spectral log difference method, and the hybrid method) are used to estimate the frequency slope of ultrasonic attenuation coefficient from ultrasonic backscatter signal. The results show that the frequency-dependent attenuation coefficient ranges from 2.3 dB/mm/MHz to 6.2 dB/mm/MHz for the bovine bone specimens. The through-transmission measured frequency slope of ultrasonic attenuation coefficient is (4.14 ± 1.14) dB/mm/MHz (mean ± standard deviation), and frequency slopes of ultrasonic attenuation coefficient are estimated by four backscattering methods to be (3.88 ± 1.15) dB/mm/MHz, (4.00 ± 0.98) dB/mm/MHz, (3.77 ± 0.84) dB/mm/MHz, and (4.05 ± 0.85) dB/mm/MHz, respectively. The estimated frequency-dependent attenuation is significantly correlated with the standard attenuation value (R = 0.78－0.92, p < 0.01), in which the spectral difference method (R = 0.91, p < 0.01) and the hybrid method (R = 0.92, p < 0.01) are more accurate with an estimated error less than 20%. The results prove that it is feasible to measure the frequency-dependent attenuation from ultrasonic backscatter signal of cancellous bone. Based on Fourier transform-inverse Fourier transform, the frequency-dependent attenuation can be compensated.The compensated ultrasonic signals are with significantly improved signal intensity and improved signal-to-noise ratio. This study is conducive to the subsequent ultrasonic backscatter measurement and ultrasonic imaging of cancellous bone.

Measurements Of Ultrasonic Phase Velocities And Attenuation Of Slow Waves In Cellular Aluminum Foams As Cancellous Bone-Mimicking Phantoms

A Numerical Simulation Method for Ultrasonic Transmission in Cancellous Bone Based on a Four-Parameter Random Growth Method

Measurement of tortuosity in aluminum foams using airborne ultrasound

Measurement of the dispersion and attenuation of cylindrical ultrasonic guided waves in long bone.

Frequency dependence of the ultrasonic power reflected from the water-tissue interface of human cancellous bone in vitro

An experimental study on the ultrasonic wave propagation in cancellous bone: waveform changes during propagation

Thickness sensitivity of ultrasound velocity in long bone phantoms.

Quasi-plane Shear Wave Propagation Induced by Acoustic Radiation Force with a Focal Line Region: a Simulation Study

The dependence of broadband ultrasound attenuation on phase interference in thin plates of variable thickness and curvature: a comparison of experimental measurement and computer simulation

Theoretical and experimental study of attenuation in cancellous bone

Cancellous bone characterization using ultrasonic backscatter parametric imaging

Measurement and Compensation of Frequency-Dependent Attenuation in Ultrasonic Backscatter Signal from Cancellous Bone

Cortical bone plate properties assessment using inversion of axially transmitted low frequency ultrasonic guided waves

Orthogonal relationships between ultrasonic velocity and material properties of bovine cancellous bone

Ultrasonic characterization of human cancellous bone in vitro using three different apparent backscatter parameters in the frequency range 0.6-15.0 mhz

Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method.

Effect of ultrasound attenuation on piezoelectric signal generation in cancellous bone

Effect of Elastic Modulus on the Nonlinear Ultrasonic Lamb Waves in Cortical Bone: A Numerical Study

Ultrasonically Determined Thickness of Long Cortical Bones: Three-dimensional Simulations of in Vitro Experiments

A preliminary study of acoustic propagation in thick foam tissue scaffolds composed of poly(lactic-co-glycolic acid)