Abstract:The performances of metamaterial absorbers can be affected by the incidence angle of electromagnetic wave. It is difficult to design the incidence angle-insensitive metamaterial absorbers. In this paper, we propose a metamaterial absorber with wide-angle incidence based on the equivalent medium theory. The absorber unit consists of a double-sided split resonant ring placed vertically on the ground. The resistors and capacitors are loaded at the opening of the resonant ring. The resistor is used to adjust the equivalent electromagnetic parameters of the metamaterial, and the capacitor is used to control the resonant frequency of the metamaterial and miniaturize the unit. When the transverse electric (TE) plane wave impinges on the surface of the absorber, R = 4000 Ohm and C = 1.5 pF, the proposed absorber can achieve an absorptivity greater than 90% at 1.59 GHz up to an incidence angle reaching 70°. Besides, the absorber can achieve an 85% absorptivity under an incidence angle of 75°. when the transverse magnetic (TM) plane wave impinges on the surface of the absorbers, R = 1200 Ω and C = 1.5 pF, the proposed absorber can achieve an absorptivity of greater than 90% at 1.59 GHz up to a 70°incidence angle. Besides, the absorber can also achieve an absorptivity of 85% up to 75°. The results show that the measurement results are basically consistent with the simulation results. In addition, when the capacitance is changed while the other parameters are fixed, the metamaterial absorber proposed in this paper still has the same wide-angle absorbing performance at the new resonant frequency. In other words, the proposed absorber has broadband operating characteristics. A frequency-tunable metamaterial absorber with wide-angle incidence can be designed based on the aforementioned results. The results in this paper provide a method of tuning capacitance. The opening is set at the other end of the split ring, and the same fixed-value resistor and variable capacitor are loaded on the left opening, and the corresponding DC bias feeder is designed. One end of the DC bias line is directly connected to the ground, and the other end needs to be separately connected to the other DC bias feeder of each unit to realize the control of the variable capacitors of each unit.

Equivalent Circuit Method Analysis of the Influence of Frequency Selective Surface Resistance on the Frequency Response of Metamaterial Absorbers

Active Metamaterial Absorber with Controllable Polarisation and Frequency

A Broadband Metamaterial Absorber Design Using Characteristic Modes Analysis

An Ultra-Wideband Metamaterial Absorber With Active Frequency Selective Surface

Thin and Broadband Electromagnetic Absorber Design Using Resistors and Capacitors Loaded Frequency Selective Surface

Analysis And Design Of Wire-Based Metamaterial Absorbers Using Equivalent Circuit Approach

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Optimal design of electromagnetic absorbers using visualization method for wideband potential applications

Characteristic Mode Analysis Of Resistor-Loaded Frequency Selective Surfaces: Theoretical Research And Experimental Verification

Design and Analysis of Lumped Resistor Loaded Metamaterial Absorber with Transmission Band

Frequency Selective Rasorber with Broadband Transmission Window Using Characteristic Modes Analysis

Novel Absorber Based on Pixelated Frequency Selective Surface Using Estimation of Distribution Algorithm

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

Design of Wide-Angle Metamaterial Absorbers Based on Equivalent Medium Theory

Electromagnetic Analysis of Metamaterial Absorber Using Finite Element/Boundary Element Method

A Wideband and Ultra-Thin Metamaterial Absorber Based on Resistive FSS

Reverse Design of Metamaterial Absorbers Based on an Equivalent Circuit

A Polarization-Independent Transmission Absorption Metamaterial Absorber Based on Electromagnetic Resonance

Design and Measurement of Microwave Absorbers Comprising Resistive Frequency Selective Surfaces

Broadening the Bandwidth of the Electromagnetic Metamaterial Absorber

Nearly Octave Bandwidth Microwave Absorber with Resistance Loaded Metamaterial