Abstract:Most MPC (Model Predictive Control) algorithms used in industries and studied in the control academia use a two-term QP (quadratic programming), where the first term is the weighted norm of the output errors, and the second term is that of the input increments. In this work, a DMC (Dynamic Matrix Control) algorithm that uses three-term QP is developed and studied, where the third term is the weighted norm of the output increments. A relationship between the three-term DMC and the two-term DMC is established; and based on that, ideal closed-loop response curves are derived. These results are useful for the tuning of the three-term DMC. Then, a method for comparing two control methods is proposed and it is shown that the three-term DMC outperforms the two-term DMC. The findings are verified using simulation studies. Finally, the three-term DMC is successfully applied to a 1030 MW ultra-supercritical coal-fired power plant. According to simulation study using the identified model, in comparison to traditional two-term DMC, there is a roughly 10% reduction in the standard deviation of load tracking error for similar control efforts. In real-life tests on the power plant, the performance of the three-term DMC is compared to that of the existing PID controller. The load rate of change increased from 0.8%/min to 1.5%/min while the standard deviation of steam pressure decreased 38%; the standard deviations of the main steam temperature and reheat steam temperature decreased more than 40% with their mean values increased by more than 2 ∘C and 4 ∘C respectively.

Cascade Constrained Model Predictive Control for Power Plant Superheated Steam Temperature System

Predictive Control and Economic Performance Optimization of CFBB Combustion Process

Application of Constrained Predictive Model to Power Plant Superheated Steam Temperature Control

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

Studies and Applications of Predictive Functional Control in Temperature Tracking of Chemical Reactors

A Power Plant Coordinated Control System Using MPC

Multivariable Predictive Control of the Main Steam Temperature in Power Plant

Temperature Advanced Control System for Batch Chemical Reaction

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Research on Cascade Control Strategy for Thermal Management System of Giant Magnetostrictive Actuator

Nonlinear model predictive control of HTR-PM load changing process

Field Application of Multiple Model Predictive Control for Superheat Temperature in Boilers

Simulation Study of Composite Control and Its Application in Superheated Steam Temperature Control System

Two-timescale Nonlinear Model Predictive Control for Flexible Operation of Coal-Fired Power Plant with Post Combustion CO2 2 Capture System

Cascade PID Controllers for Superheated Steam Boiler Temperatures Based on Probabilistic Robustness

Superheated Steam Temperature Control Based on a Hybrid Active Disturbance Rejection Control

Optimum Cascade PID Controllers for Thermal System

State variable-fuzzy prediction control strategy for superheated steam temperature of thermal power units

Nonlinear Multivariable Power Plant Coordinate Control by Constrained Predictive Scheme