Abstract:During the commissioning of Nuclear power plant unit, it is necessary to perform the transient condition test that the single pump operation of Main Feedwater (APA) pump triggers the rapid load rejection of steam turbine. Due to the sudden loss of a main water supply pump during the test, the level of the steam generator will change dramatically. If there is a signal of "SG level low plus steam / water flow mismatch" or a signal of "SG level low low", the reactor trip protection will be triggered. PI controller is used as the core controller of the main feed water pump control process. The optimal parameters of PI controller directly affect the level control performance of steam generator. At present, the units that have completed the test only verify that the control system meets the requirements of transient conditions, but it does not solve the phenomenon that the oscillation frequency of the feed water regulating system is too high under stable conditions. In this paper, the safety range of the control parameters under transient condition is determined by simulation model test, and then the steady-state performance of the parameters is improved by field test, so the optimization of the control parameters is completed, and the regulation performance of the feed water control system under single pump operation and steady-state condition of the main feed water pump is improved, and practical results are achieved. The results show that the optimization of the controller parameters in this paper can meet the requirements of transient conditions, and can effectively increase the stability of the control system. This research method has been successfully applied in generation II unit, and it is also useful for the generation-III unit.

Optimum Cascade PID Controllers for Thermal System

Performance monitoring and assessment for PID controller

On PID Controllers Based on Simulated Annealing Algorithm

Research on Cascade Control Strategy for Thermal Management System of Giant Magnetostrictive Actuator

Cascade PID Controllers for Superheated Steam Boiler Temperatures Based on Probabilistic Robustness

An Expert PID Control Method for Level Control of CFB Boiler

Study on Optimization of PID for Feed-water Control System of RB Test in PWR Nuclear Power Station

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Studies and Applications of Predictive Functional Control in Temperature Tracking of Chemical Reactors

An Optimized Design of Multivariable PID Controllers for Steam Turbine Generator Sets

Multivariable Predictive Control of the Main Steam Temperature in Power Plant

Optimization of PID Controllers of a Boiler-turbine Coordinated Control System Based on a Genetic Algorithm

Control of the Superheated Steam Temperature: A Comparison Study Between PID and Fractional Order PID Controller

Tuning PID Controllers Based on Stable Region

The Fuzzy Model PID Optimization Control Designed for a Heat Exchange System in a Packed Tower

Performance assessment and tuning of PID control using TLBO: the single-loop case and PI/P cascade case

Simulation Analysis on PID Control of Distributed Parameter Model in Thermal Process

Study and Realization of Automatic Control for Variable Flow Heating Systems

Design of PLC Temperature Control System in Chemical Distillation

Adaptive Fuzzy PID Control Design and Simulate of Main Steam Temperature of Power Plant

A Novel RBF-PID Control Strategy for Fresh Steam Temperature Based on Chaotic and Genetic Algorithm