Abstract:The analytical solution is derived for the plane strain stress field around a cylindrical void in a hexagonal close-packed single crystal with three in-plane slip systems oriented at the angle π/3 with respect to one another. The critical resolved shear stress on each slip system is assumed to be equal. The crystal is loaded by both internal pressure and a far-field equibiaxial compressive stress. The deformation field takes the form of angular sectors, called slip sectors, within which only one slip system is active; the boundaries between different sectors are radial lines. The stress fields are derived by enforcing equilibrium and a rigid, ideally plastic constitutive relationship, in the spirit of anisotropic slip line theory. The results show that each slip sector is divided into smaller regions denoted as stress sectors and the stress state valid within each stress sector is derived. It is shown that stresses are unique and are continuous within stress sectors and across stress sector boundaries, but the gradient of stresses is not continuous across the boundaries between stress sectors. The solution shows self-similarity in that the stresses over the entire domain can be determined from the stresses within a small region adjacent to the void by invoking certain scaling and symmetry properties. In addition, the stress state exhibits periodicity along logarithmic spirals which emanate from the void. The results predict that the mean value of in-plane pressure required to activate plastic deformation around a void in a single crystal can be higher than that necessary for a void in an isotropic material and is sensitive to the orientation of the slip systems relative to the void.

The Dugdale Model for A Semi-Infinite Crack in A Strip of Two-Dimensional Decagonal Quasicrystals

A Closed-Form Solution to the Mechanism of Interface Crack Formation with One Contact Area in Decagonal Quasicrystal Bi-Materials

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

Effect of T-stress on the fracture in an infinite two-dimensional decagonal quasicrystals of a cruciform crack with unequal arms

Penny-Shaped Dugdale Crack in A Transversely Isotropic Medium and under Axisymmetric Loading

Solution of a Dugdale–Barenblatt crack in an infinite strip by a hyper-singular integral equation

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

A phase-field model for thermo-elastic fracture in quasicrystals

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

Elastic Displacement Fields Induced by Dislocations in Dodecagonal Quasicrystals

Cylindrical void in a rigid-ideally plastic single crystal III: Hexagonal close-packed crystal

Theory of linear, nonlinear and dynamic fracture for quasicrystals

Dislocation-based Semi-Analytical Method for Calculating Stress Intensity Factors of Cracks: Two-dimensional Cases

Crack–inclusion interaction in a quasicrystal medium with nonlocal effect

Cohesive Damage Zone Model for A Circular Crack in A Quasi-Brittle Solid

Model of branched crack and hole defects in finite plane

Penny-Shaped Dugdale Crack in a Transverse Isotropic Medium

Semi-Analytic Solution of Multiple Inhomogeneous Inclusions and Cracks in an Infinite Space

Interaction of A Wedge Disclination Dipole with Interfacial Cracks

Elastic fields of double branched and Kalthoff–Winkler cracks in a half-plane