Abstract:Large eddy simulation coupled with the linear eddy model (LEM) is employed for the simulation of n-heptane spray flames to investigate the low temperature ignition and combustion process in a constant-volume combustion vessel under diesel-engine relevant conditions. Parametric studies are performed to give a comprehensive understanding of the ignition processes. The non-reacting case is firstly carried out to validate the present model by comparing the predicted results with the experimental data from the Engine Combustion Network (ECN). Good agreements are observed in terms of liquid and vapour penetration length, as well as the mixture fraction distributions at different times and different axial locations. For the reacting cases, the flame index was introduced to distinguish between the premixed and non-premixed combustion. A reaction region (RR) parameter is used to investigate the ignition and combustion characteristics, and to distinguish the different combustion stages. Results show that the two-stage combustion process can be identified in spray flames, and different ignition positions in the mixture fraction versus RR space are well described at low and high initial ambient temperatures. At an initial condition of 850K, the first-stage ignition is initiated at the fuel-lean region, followed by the reactions in fuel-rich regions. Then high-temperature reaction occurs mainly at the places with mixture concentration around stoichiometric mixture fraction. While at an initial temperature of 1000K, the first-stage ignition occurs at the fuel-rich region first, then it moves towards fuel-richer region. Afterwards, the high-temperature reactions move back to the stoichiometric mixture fraction region. For all of the initial temperatures considered, high-temperature ignition kernels are initiated at the regions richer than stoichiometric mixture fraction. By increasing the initial ambient temperature, the high-temperature ignition kernels move towards richer mixture regions. And after the spray flames gets quasi-steady, most heat is released at the stoichiometric mixture fraction regions. In addition, combustion mode analysis based on key intermediate species illustrates three-mode combustion processes in diesel spray flames.

Large Eddy Simulation of Active Control on Low Frequency Combustion Instabilities in a Dump Combustor

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Experimental Investigation on High Frequency Perturbation to Combustion Instability by Low Frequency Actuator in a Backward-facing Step Combustor

Large-Eddy Simulation of Premixed Methane/Air Jet Flames

LARGE EDDY SIMULATION OF COMBUSTION INSTABILITY OF LOW-SWIRL FLAMES IN A MULTI-NOZZLE COMBUSTOR

Studies on a Swirling Heptane Spray Flame by Large-Eddy Simulation

Large eddy simulations of spray combustion instability in an aero-engine combustor at elevated temperature and pressure

Large Eddy Simulation and Acoustic Analysis of Combustion Instability in an Annular Combustor with Low-Swirl Flames

Large-eddy Simulation of Flow and Combustion Dynamics in a Lean Partially-premixed Swirling Combustor

A Bayesian Optimization Framework for the Control of Combustion Instability of a Bluff-Body Stabilized Combustor

Large Eddy Simulation of a Dual Swirl Gas Turbine Combustor: Flame/flow Structures and Stabilisation under Thermoacoustically Stable and Unstable Conditions

Large-eddy Structures of Turbulent Swirling Flows and Methane-Air Swirling Diffusion Combustion

Large-eddy simulation of unstable non-reactive flow in a swirler combustor

Experimental Investigations and Large-Eddy Simulation of Low-Swirl Combustion in a Lean Premixed Multi-Nozzle Combustor

Large Eddy Simulation of the Low Temperature Ignition and Combustion Processes on Spray Flame with the Linear Eddy Model

Large-eddy Simulation of Turbulent Combustion Based on Steady Flamelet/progress Variable Approach

Large Eddy Simulation of Combustion Process in a Boosted and Downsized Gasoline Engine

Large Eddy Simulation of Combustion Recession: Effects of Oxygen Levels and End-of-Injection Rate Profiles

Large Eddy Simulation of Supersonic Reaction Mixed Layer in a RBCC Combustor Model

Large-eddy simulations of self-excited thermoacoustic instability in a premixed swirling combustor with an outlet nozzle

Large Eddy Simulation of Flame Propagation During the Ignition Process in an Annular Multiple-Injector Combustor