Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

A Novel Gas Ionization Sensor Using Pd Nanoparticle-Capped ZnO

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

High-performance gas sensor based on ZnO nanowires functionalized by Au nanoparticles

Enhanced Acetone-Sensing Properties to Ppb Detection Level Using Au/Pd-doped ZnO Nanorod

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

Nanopillar ZnO gas sensor for hydrogen and ethanol

Enhanced P-Type NO2-sensing Properties of ZnO Nanowires Utilizing CNTs Electrode

Enhancement of H2 Gas Sensing Using Pd Decoration on ZnO Nanoparticles

Enhanced Acetone Sensing Properties Based on Au-Pd Decorated ZnO Nanorod Gas Sensor

Novel Au Nanoparticle-Modified ZnO Nanorod Arrays for Enhanced Photoluminescence-Based Optical Sensing of Oxygen

Nanoporous ZnO structure prepared by HiPIMS sputtering for enhanced ozone gas detection

ZnO single nanowire gas sensor: A platform to investigate the sensitization of Pt

Detection mechanism in highly sensitive ZnO nanowires network gas sensors

Highly responsive and selective ppb-level NO<sub>2</sub> gas sensor based on porous Pd-functionalized CuO/rGO at room temperature

Controllable synthesis of porous 3D Pd loaded ZIF-67/g-C3N4 hierarchical nanostructure for efficient detection of NO2 gas at room temperature

Study of a palladium nanoparticle/ In-Zn-O thin film-based hydrogen gas sensor

Fe2O3/ZnO core–shell nanorods for gas sensors

Constructing 2D Porous ZnO Gas Sensors Based on Polyvinylpyrrolidone-Assisted Zn-MOF Nanosheets for NO2 Detection

An Enhanced Gas Ionization Sensor from Y-doped Vertically Aligned Conductive ZnO Nanorods