Abstract:As the energy crisis becomes worse, hydrogen as a clean energy source is more and more widely used in industrial production and people’s daily life. However, there are hidden dangers in hydrogen storage and transportation, because of its flammable and explosive features. Gas detection is the key to solving this problem. High quality sensors with more practical and commercial value must be able to accurately detect target gases in the environment. Emerging porous metal-organic framework (MOF) materials can effectively improve the selectivity of sensors as a result of high surface area and coordinated pore structure. The application of MOFs for surface modification to improve the selectivity and sensitivity of metal oxides sensors to hydrogen has been widely investigated. However, the influence of MOF modified film thickness on the selectivity of hydrogen sensors is seldom studied. Moreover, the mechanism of the selectivity improvement of the sensors with MOF modified film is still unclear. In this paper, we prepared nano-sized ZnO particles by a homogeneous precipitation method. ZnO nanoparticle (NP) gas sensors were prepared by screen printing technology. Then a dense ZIF-8 film was grown on the surface of the gas sensor by hydrothermal synthesis. The morphology, the composition of the elements and the characters of the product were analyzed by X-ray diffraction analysis (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Brunauer-Emmett-Teller (BET) and differential scanning calorimetry (DSC). It is found that the ZIF-8 film grown for 4 h cannot form a dense core-shell structure. The thickness of ZIF-8 reaches 130 nm at 20 h. Through the detection and analysis of hydrogen (1000 ppm), ethanol (100 ppm) and acetone (50 ppm) from 150 °C to 290 °C, it is found that the response of the ZnO@ZIF-8 sensors to hydrogen has been significantly improved, while the response to ethanol and acetone was decreased. By comparing the change of the response coefficient, when the thickness of ZIF-8 is 130 nm, the gas sensor has a significantly improved selectivity to hydrogen at 230 °C. The continuous increase of the thickness tends to inhibit selectivity. The mechanism of selectivity improvement of the sensors with different thickness of the ZIF-8 films is discussed.

Fe2O3/ZnO core–shell nanorods for gas sensors

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Gas sensors based on -Fe2O3 nanorods, nanotubes and nanocubes

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

Facile Synthesis of Α-Fe2o3/zno Core-Shell Nanowires for Enhanced H2S Sensing

Core-shell NiO Sphere Prepared by a Facile Method with Enhanced VOC Gas Sensing

Synthesis of ZIF-8 Coating on ZnO Nanorods for Enhanced Gas-Sensing Performance

One-Dimensional Zinc Oxide Decorated Cobalt Oxide Nanospheres for Enhanced Gas-Sensing Properties

NO<sub>2</sub> Gas Sensing Characters of Polycrystaline ZnO Nanorods

Synthesis of ZnO@ZIF-8 Nanorods with Enhanced Response to VOCs

Gas Sensing Properties of ZnO Nanorods Prepared by Hydrothermal Method

Nanopillar ZnO gas sensor for hydrogen and ethanol

High-performance gas sensor based on ZnO nanowires functionalized by Au nanoparticles

ZIF-derived Nanoparticles Modified ZnO Nanorods Hierarchical Structure for Conductometric NO2 Gas Sensor

Sulfur dioxide sensing properties of MOF-derived ZnFe2O4 functionalized with reduced graphene oxide at room temperature

Coaxial electrospinning Fe2O3@Co3O4 double-shelled nanotubes for enhanced ethanol sensing performance in a wide humidity range

ZnO@ZIF-8 Core-Shell Structure Gas Sensors with Excellent Selectivity to H2

Rhombus-shaped Co3O4 nanorod arrays for high-performance gas sensor

Fabrication and Gas Sensing Properties of Hollow Core–shell SnO2/α-Fe2O3 Heterogeneous Structures

Isobutanol gas sensor based on Fe2O3–SnO2 heterostructure nanostructure