Abstract:BiFeO3 BaTiO3 based ceramics are considered to be the most promising lead-free piezoelectric ceramics due to their large piezoelectric response and high Curie temperature. Since the piezoelectric response of piezoelectric ceramics just appears after poling engineering, in this work, the domain evolution and microscopic piezoresponse were observed in-situ using piezoresponse force microscopy (PFM) and switching spectroscopy piezoresponse force microscopy (SS-PFM), which can effectively study the local switching characteristics of ferroelectric materials especially at the nanoscale. The new domain nucleation preferentially forms at the boundary of the relative polarization region and expands laterally with the increase of bias voltage and temperature. The maximum piezoresponse (R s), remnant piezoresponse (R rem), maximum displacement (D max), and negative displacement (D neg) at 45 V and 120 °C reach 122, 69, 127 pm, and 75 pm, respectively. Due to the distinct effect of poling engineering in full domain switching, the corresponding d 33 at 50 kV/cm and 120 °C reaches a maximum of 205 pC/N, which is nearly twice as high as that at room temperature. Studying the evolution of ferroelectric domains in the poling engineering of BiFeO3 BaTiO3 ceramics provides an insight into the relationship between domain structure and piezoelectric response, which has implications for other piezoelectric ceramics as well.

Poling Dependence and Stability of Piezoelectric Properties of Ba(Zr0.2Ti0.8)O3-(Ba0.7Ca0.3)TiO3 Ceramics with Huge Piezoelectric Coefficients

Piezoelectric And Strain Properties Of Ba(Ti1-Xzrx)O-3 Ceramics

Effect of Poling Temperature on Piezoelectric Coefficient in (na0.52 K0.4425 Li0.0375 )(nb0.86 Ta0.06 Sb0.08 )O3 Ceramics

Effects of Sintering Temperature and Poling Conditions on the Electrical Properties of Ba0.70Ca0.30TiO3 Diphasic Piezoelectric Ceramics

Effect of Poling Temperature on Piezoelectricity of Cazro3-Modified (K, Na)Nbo3-Based Lead-Free Ceramics

Structural Evolution, Electrical Properties and Electric-Field-induced Changes of (0.8− X )pbtio 3 – X BiFeO 3 –0.2bazro 3 System Near the Morphotropic Phase Boundary

Enhanced piezoelectricity in 0.7BiFeO3-0.3BaTiO3 lead-free ceramics: Distinct effect of poling engineering

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Polymorphic Phase Transition and Piezoelectric Properties of (ba1−xcax)(ti0.9zr0.1)o3 Lead-Free Ceramics

Piezoelectric and Dielectric Properties of (Ba1−xCax)(Ti0.95Zr0.05)O3 Lead-Free Ceramics: Rapid Communications of the American Ceramic Society

Temperature Stability in Dy-Doped (Ba0.99ca0.01)(ti0.98zr0.02)o-3 Lead-Free Ceramics with High Piezoelectric Coefficient

High-stability Quinary Lead-Based Piezoelectric Ceramics with High Piezoelectric Properties

Modified Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbZrO 3 –PbTiO 3 ceramics with high piezoelectricity and temperature stability

High Piezoelectric D33 Coefficient in (ba1−xcax)(ti0.98zr0.02)o3 Lead-Free Ceramics with Relative High Curie Temperature

The Electrical Properties of (1−x)(bi0.5na0.5tio3–bi0.5k0.5tio3–batio3)–xcazro3 Lead-Free Piezoelectric Ceramics

Enhanced Piezoelectric Properties of (ba1−xcax)(ti0.92sn0.08)o3 Lead‐Free Ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

High Piezoelectric D33 Coefficient of Lead-Free (ba0.93ca0.07)(ti0.95zr0.05)o3 Ceramics Sintered at Optimal Temperature

Phase Transition and High Piezoelectricity in (ba,ca)(ti1−xsnx)o3 Lead-Free Ceramics

High Piezoelectricity Due to Multiphase Coexistence in Low-Temperature Sintered (ba,ca)(ti,sn)o3–cuox Ceramics

Effect of thermal-cycling on the piezoelectricity of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 Pb-free piezoceramic