Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Fabrication of Polyaniline/titanium Dioxide Composite Nanofibers for Gas Sensing Application

The Research and Application of Polyaniline/Multi-Walled Carbon Nanotubes Composite Sensitive Membrane for Ammonia Gas Detection

Composites of Fe2O3 Nanosheets with Polyaniline: Preparation, Gas Sensing Properties and Sensing Mechanism

Facile Preparation of a Composite of TiO2 Nanosheets and Polyaniline and Its Gas Sensing Properties

Gas Sensing Properties of A Composite Composed of Electrospun Poly(Methyl Methacrylate) Nanofibers and in Situ Polymerized Polyaniline

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film

Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

Synthesis of Polyaniline Nanotubes Using Mn2O3 Nanofibers As Oxidant and Their Ammonia Sensing Properties

Ammonia Sensing Behaviors of TiO2-PANI/PA6 Composite Nanofibers

Ammonia sensing behaviors of TiO2-PANI/PA6 composite nanofibers.

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Enhanced NH3 sensing performance of polyaniline via a facile morphology modification strategy

Facile Fabrication of Polyaniline/multi-Walled Carbon Nanotubes/molybdenum Disulfide Ternary Nanocomposite and Its High-Performance Ammonia-Sensing at Room Temperature

Gas sensing properties of layer-by-layer self-assembled ultrathin film of polyaniline/titanium dioxide

Facile Synthesis of Polyaniline/Carbon-Coated Hollow Indium Oxide Nanofiber Composite with Highly Sensitive Ammonia Gas Sensor at the Room Temperature

PANI/Ti3C2Tx composite nanofiber-based flexible conductometric sensor for the detection of NH3 at room temperature

Preparation,characterization and Gas Sensitivity Studies of Polyaniline and Its Doped Materials

In-Situ Self-Assembled Polyaniline/Carbon Nanotubes Nanofiber Thin Films For Ammonia Gas Sensors

Effect of Dopants on the NH_3-Sensitive Chracteristics of Polyaniline-Titanium Dioxide Composite Thin Films