Extraction of Tungsten from Simulated Autoclave-Soda Leaching Liquor of Scheelite with Quaternary Ammonium Salt

CHEN Shi-liang,ZHANG Gui-qing,XIAO Lian-sheng,GUAN Wen-juan
DOI: https://doi.org/10.19476/j.ysxb.1004.0609.2011.07.036
2011-01-01
The Chinese Journal of Nonferrous Metals
Abstract:The direct solvent extraction of tungsten from autoclave-soda leach solution of scheelite using quaternary ammonium salt(tri-n-octylmethy-lammonium chloride,TOMAC) was investigated to solve the problems of slow phase separation and low WO3 concentration in strip liquor which are main disadvantages in the process of direct solvent extraction of tungsten from alkaline medium.The effects of Na2CO3 concentration in leaching solution,composition and concentration of stripping reagent on the extraction and stripping were investigated.The isotherms of the extraction and stripping were plotted,and the optimum flow ratio and stripping stage were determined through Kremser formula.Based on these,the centrifugal extractor was used to simulate the counter current extraction.The results indicate that the concentration of Na2CO3 in feed solution has little influence on the extraction of WO3 but great influence on the phase separation in the extraction,the saturated loading capacity(for WO3) of organic reaches 91.49 g/L when the concentration of extractant is 50%(volume fraction),the addition of NH3-H2O into NH4HCO3 as the mixed stripping reagent not only improves the stability of stripping liquor,but also increases the WO3 concentration in stripping liquor.The phase separation is good during the extraction and stripping,and the concentration of WO3 in stripping liquor reaches about 160 g/L.The stripping liquor can be used to produce APT of 0 grade of national standards of China.
What problem does this paper attempt to address?