Abstract:Tungsten production primarily relies on scheelite, a secondary resource due to its complex ore composition and lower grade compared to high-grade wolframite. Synthetic scheelite gains significance for its low impurity content and accessibility in ongoing laboratory-based investigations. Recent advancements offer a feasible environment-friendly leaching method using a mixed solution of H 2 SO 4 and H 2 O 2 under normal pressure and moderate temperatures. However, comprehensive research on this novel method is lacking, emphasising the need for collaborative exploration and operational optimisation. The present work is to provide insights and improvements in reagent usage to promote economic and environmental sustainability. A detailed investigation into the thermal decomposition process was also conducted without compromising leaching efficiency. The findings suggest the potential for eco-friendly lixivium recycling with reduced levels of chemicals, decreasing operational costs. Notably, optimising the thermal decomposition duration to 6 hours at an L/S (mL/g) ratio of 10 enhances H 2 WO 4 crystallization. Furthermore, experiments without H 2 SO 4 supplementation highlight the system's optimisation potential. Finally, the leaching process was optimised by decreasing H 2 SO 4 concentration to 1 mol/L from 3 mol/L, increasing the temperature to 60°C, and extending the leaching duration to 120 minutes. This leads to a cost-effective synthetic scheelite leaching process with environmental benefits. La production de tungstène se fie principalement à la scheelite, une ressource secondaire en raison de la composition complexe de son minerai et de sa teneur inférieure par rapport à celle de la wolframite à haute teneur. La scheelite synthétique gagne en importance en raison de sa faible teneur en impuretés et son accessibilité dans les investigations en cours en laboratoire. Des progrès récents offrent une méthode de lixiviation réalisable et écologique utilisant une solution mixte de H 2 SO 4 et de H 2 O 2 sous une pression normale et à des températures modérées. Cependant, il manque des recherches approfondies sur cette nouvelle méthode, mettant l'emphase sur le besoin d'une exploration collaborative et d'une optimisation opérationnelle. Le travail courant vise à fournir des connaissances et des améliorations dans l'utilisation des réactifs pour favoriser la durabilité économique et environnementale. Une investigation détaillée du procédé de décomposition thermique a également été entreprise sans compromettre l'efficacité de la lixiviation. Les résultats suggèrent le potentiel d'un recyclage écologique du lixiviat avec une réduction de niveaux de produits chimiques, diminuant les coûts opérationnels. Notamment, l'optimisation de la durée de décomposition thermique à 6 heures à un rapport L/S (ml/g) de 10 améliore la cristallisation de H 2 WO 4 . De plus, des expériences sans supplémentation en H 2 SO 4 soulignent le potentiel d'optimisation du système. Finalement, on a optimisé le procédé de lixiviation en diminuant la concentration de H 2 SO 4 de 3 mol/L à 1 mol/L, en augmentant la température à 60°C et en étendant la durée de lixiviation à 120 minutes. Cela conduit à un procédé de lixiviation de la scheelite synthétique qui est économique avec des avantages environnementaux.

Solvent Extraction of Tungsten and Rare Earth with Tertiary Amine N235 from H2SO4–H3PO4 Mixed Acid Leaching Liquor of Scheelite

Selectively extracting H 2 WO 4 of high purity from the H 2 SO 4 decomposition product of scheelite through hydrogen peroxide coordination followed by purification using ion-exchange and solvent extraction and thermal decomposition

An eco-friendly and high-yield extraction of rare earth from the leaching solution of ion adsorbed minerals

The enrichment and separation of lanthanides ions from wastewater using solvent sublation coupled with high speed countercurrent chromatography

Separation of Vanadium and Tungsten in Roasting‐acid Leaching Solutions of the Spent Selective Catalytic Reducing Denitration Catalyst by Co‐extraction Using Hydroxyoxime Extractant‐quaternary Ammonium Salt Extractant LIX984–N263 Extractant

Extraction and separation of tungsten from acidic high-phosphorus solution

Complexation extraction of scheelite and transformation behaviour of tungsten-containing phase using H2SO4 solution with H2C2O4 as complexing agent

Removal of Sulfate Ions from Calcium Oxide Precipitation Enrichment of a Rare Earth Leaching Liquor by Stirring Washing with Sodium Hydroxide

The recovery of rare earth metals from WEEE leaching solution via liquid-liquid extraction

Solvent Extraction of La(III) with 2-Ethylhexyl Phosphoric Acid-2-ethylhexyl Ester (EHEHPA) by Membrane Dispersion Micro-Extractor

Solvent Extraction of Lanthanum and Cerium Ions from Hydrochloric Acidic Aqueous Solutions Using Partly Saponified 2-Ethylhexyl Phosphonic Acid Mono-2-ethylhexyl Ester

Recovering RE from leaching liquor of rare earth ore by extraction

Selective separation of lithium from the hydrochloric acid leachate of lithium ores via the extraction system containing TBP-FeCl 3

Optimization of a Rare Earth and Aluminum Leaching Process from Weathered Crust Elution-Deposited Rare Earth Ore with Surfactant CTAB

Production of high purity rare earth mixture from iron-rich spent fluid catalytic cracking (FCC) catalyst using acid leaching and two-step solvent extraction process

Selective reduction separation and recovery of tellurium and bismuth from acidic leaching solution

Recovery of rare earth elements from sedimentary rare earth ore via sulfuric acid roasting and water leaching

An optimisation study for leaching synthetic scheelite in H2SO4 and H2O2 solution

Removal and Recovery of Arsenic(III) from Hydrochloric Acid Leach Liquor of Tungsten Slag by Solvent Extraction with 2-Ethylhexanol

Recovery of rare earth elements from deep-sea mud using acid leaching followed by selective solvent extraction with N1923 and TBP

Fast Extraction and Enrichment of Rare Earth Elements from Waste Water Via Microfluidic-Based Hollow Droplet