On the investigation of microstructure and mechanical properties of the AlCoCrFeNi 2.1 /316 L dissimilar spot-welded joint
Jianhui Li,Wei Wei,He Zhang,Ze Yao,Minghua Chen,Xingming Zhao,Guili Yin,Xinhua Yang
DOI: https://doi.org/10.1016/j.mtcomm.2024.110990
IF: 3.8
2024-11-22
Materials Today Communications
Abstract:This study receives a free-defect spot-welded joint, using the base metal of AlCoCrFeNi 2.1 /316 L, for the first time, by a resistance spot welding technique. Electron backscatter diffraction, X-ray diffraction, and scanning electron microscopy were used to analyze the microstructure of the nugget and heat-affected zone of the spot-welded joint. Mechanical experiments were conducted to gain mechanical properties such as micro-hardness and shear tensile strength. The nugget on the side of 316 L and AlCoCrFeNi 2.1 is not fully symmetrical, and the nugget offset is observed on the AlCoCrFeNi 2.1 side owing to dissimilar thermo-physical properties. Thermodynamic calculation and XRD diffraction analysis confirm that both austenite and (Fe, Ni) phases are existent in the nugget zone. Eventually, under a shear load, an interface fracture of the spot-welded joint was observed and the fracture morphology was examined. This work could serve as an initial basis for further research on high entropy alloy resistance spot welding.
materials science, multidisciplinary