Abstract:According to field operation records, lightning stroke accounts for 60% of transmission line failures. Therefore, it is of great significance to strengthen lightning protection of the power system. However, there are several lightning faults, and the corresponding protection methods differ. Consequently, identifying lightning stroke faults will be beneficial to take corresponding lightning protection measures. This paper investigates the mechanism of different lightning strike faults, and simulates them by a 110kV transmission line EMTP-ATP model. Analysis and simulation show that the direction of tower current represents lightning's polarity; the insulator voltage's direction differs when shielding failure or back striking occurs. If insulator flashovers, the voltage of the insulator drops down to zero, and as the transient process comes to an end, the voltage of the insulator on the nearby tower decreases to zero as well; after the occurrence of back striking flashover, the direction of insulator voltage on nearby tower alters. Based on those features, insulator voltage and tower current are introduced as a characteristic signal, and their direction and rms of them are formed as recognition parameters for lightning stroke identification. The EMTP-ATP simulations demonstrate that the proposed method is correct and effective, and the recognition rate of different lightning faults is 100% under the abovementioned method.

Simulation study on transient performance of lightning over-voltage of transmission lines

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Modeling Lightning Performance of Transmission Systems Using PSCAD

Simulation on lightning overvoltage of ±800kV converter station

Approaching to Rotated Lightning Strike on Transmission Line

Research on lightning intruding waves in 220 kV GIS substation

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Study on Lightning Withstand Performance of ±500 kV DC Transmission Lines

Research on Resonance Overvoltage of EHV Transmission Lines Caused by Lightning Strike

Study on the Identification of Lightning Over-Voltage Based on ATP-EMTP

Study on Lightning Intruding Overvoltage on DC Side of ±1100kv Converter Station

Research of the Lightning Protection Performance for 220 Kv Double-Circuit Transmission Line

Single pulse lightning and multiple lightning intrusion overvoltage in 500 kV GIS substation

Research on lighting fault identification technology of transmission lines based on non-contact sensing

Simulation of Shielding Failure Flash-over of Transmission Line Based on Leader Progression Model

Study on identification of fault and lightning strokes in boundary protection for EHV transmission lines

Analysis and research prospect of lightning-induced voltages in overhead transmission lines

Simulation Calculation and Analysis of Lightning Induced Overvoltage on Power Distribution Lines

Study on the Calculation of Shielding Failure for Dc Transmission Lines

220Kv Transmission Line Fault Diagnosis and Analysis

Experimental study of transients and electrical fields caused by lightning flashover in the uhvdc converter station