Abstract:Azo dyes are the most widely used synthetic dyes in the printing and dyeing process. However, the discharge of untreated azo dyes poses a potential threat to aqueous ecosystems and human health. Herein, we fabricated a novel heterogeneous catalyst: activated-carbon-fiber-supported ferric alginate (FeAlg-ACF). Together with peroxymonosulfate (PMS) and visible light, this photocatalytic oxidation system was used to remove an azo dye—azophloxine. The results indicated that the proposed catalytic oxidation system can remove 100% of azophloxine within 24 min, while under the same system, the removal rates were only 92% and 84% when ferric alginate was replaced with ferric citrate and ferric oxalate, respectively, which showed the superiority of FeAlg-ACF. The degradation of azophloxine is achieved by the active radicals (SO4•− and •OH) released from PMS and persistent free radicals from activated carbon fiber. Moreover, due to ferric alginate’s highly intrinsic photosensitivity, visible radiation can further enhance the ligand-to-metal charge transfer (LMCT) processes. After 24 min of treatment, the total organic carbon of the azophloxine solution (50 μmol/L) decreased from 1.82 mg/L to 79.3 μg/L and the concentration of nitrate ions increased from 0.3 mg/L to 8.6 mg/L. That is, up to 93.5% of azophloxine molecules were completely degraded into inorganic compounds. Consequently, potential secondary contamination by intermediate organic products during catalytic degradation was prohibited. The azophloxine removal ratio was kept almost constant after seven cycles, indicating the recyclability and longevity of this system. Furthermore, the azophloxine removal was still promising at high concentrations of Cl−, HCO3−, and CO32−. Therefore, our proposed system is potentially effective at removing dye pollutants from seawater. It provides a feasible method for the development of efficient and environmentally friendly PMS activation technology combined with FeAlg-ACF, which has significant academic and application value.

Decolorization of methyl orange solution catalyzed by fly ash-H 2O2 under microwave irradiation

Microwave induced discoloration of methyl orange solution with fly ash

Degradation of Methyl Orange Solution by Microwave-Assisted Catalysis of H2o2 with Chromium Residue

Microwave-assisted Fenton-like Decolorization of Methyl Orange Solution Using Chromium Compounds

Degradation of 6-nitro-1,2,4-diazo acid in wastewater by microwave-fly ash catalytic system

Rapid Mineralization of Azo-Dye Wastewater by Microwave Synergistic Electro-Fenton Oxidation Process

Rapid Removal of Azophloxine Via Catalytic Degradation by A Novel Heterogeneous Catalyst under Visible Light

Microwave-assisted high-efficiency degradation of methyl orange by using CuFe2O4/CNT catalysts and insight into degradation mechanism

Microwave induced catalytic degradation of methyl orange with Cr(III)

Methyl-orange and cadmium simultaneous removal using fly ash and photo-Fenton systems

Catalytic degradation of crystal violet and methyl orange in heterogeneous Fenton-like processes

Microwave induced catalytic degradation of methyl orange solution with TiO2/H2O2

Rapid Decolorization of Dye Orange G by Microwave Enhanced Fenton-Like Reaction with Delafossite-Type Cufeo2

Study on Catalytic Wet Oxidation of Methyl Orange under Room Temperature and Atmospheric Pressure

Novel ternary PPy–ZnFe2O4/fly ash-cenosphere photocatalysts for photodegradation of methyl orange under UV light

Removal of Methyl Orange in Aqueous Solutions Using Hydrochloric Acid-Modified Kaolinite Supported Nanosized Zero-Valent Iron

Study on Microwave Assisted H2O2 Decolorization of Dilute Methyl Orange Solution

Degradation of methyl orange by the Fenton-like reaction of pyrite-activated hydrogen peroxide forming the Fe(III)/Fe(II) cycle

Degradation of Orange G by Microwave Coupled with Fenton-like Reaction Using CuFeO2 as Catalysis

Degradation of methyl orange solution with microwave-irradiated Cr(VI)-H_2O_2 system

Studies on Degradation of Methyl Orange Wastewater by Combined Electrochemical Process