Abstract:Capacitive deionization (CDI), an emerging method to eliminate ions from water at a low cost, has garnered significant interest in recent years. This study evaluates the implication of cation exchange resin loading on the membrane via the nonsolvent-induced phase inversion method. After determining the quantity of resins efficiently loaded on the membrane, it was subsequently utilized as a cation exchange membrane in the membrane capacitive deionization (MCDI) unit to examine the performance removal of Ni 2+ . The results show that the amount of resins influenced the membrane structure and significantly improved the efficiency of Ni 2+ removal. The sulfonic acid group show a strong intensity directly proportional to the quantity of resins based on the FTIR measurement. In conjunction with the enhanced resin amount, ion exchange capacity and water content were increased. Simultaneously, there was an observed elevation in the water contact angle and the roughness of the membrane surface with increased resin amount. In the MCDI unit, membrane M20 (20% by weight resin) was employed to elucidate its roles in the CDI unit, encompassing an examination of various concentrations and flow rates, with Ni 2+ utilized as a test contaminant. The results demonstrated that using membrane M20 in the MCDI (MCDI-M20) unit consistently exhibited higher adsorption levels than the CDI unit, reaching 19.80 mg g −1 ACC in the MCDI-M20 unit, while CDI unit achieved 10.27 mg g −1 ACC at 200 mg L −1 Ni 2+ concentration and a flow rate of 10 mL min −1 at 1.2 V. Additionally, Ni 2+ concentrations and flow rates in CDI system had an evident impact on the duration of adsorption due to the mechanisms of ions transport on the membrane. This study suggests that employing the prepared membrane in the MCDI unit enhanced the removal of Ni 2+ from the solution, contributing to sustainable development goals.

Electrosorption of different cations and anions with membrane capacitive deionization based on carbon nanotube/nanofiber electrodes and ion-exchange membranes

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

Electrosorption of Anions with Carbon Nanotube and Nanofibre Composite Film Electrodes

Preparation of heterogeneous cation exchange membrane and its contributions in enhancing the removal of Ni 2+ by capacitive deionization system

Selective removal of Na+ by NaTi2(PO4)3-MWCNT composite hollow-fiber membrane electrode in capacitive deionization

Ion selective electrosorption by two pseudocapacitive intercalating nanocomposite electrodes

Controlled synthesis of ZnO modified N-doped porous carbon nanofiber membrane for highly efficient removal of heavy metal ions by capacitive deionization

Cation selectivity of activated carbon and nickel hexacyanoferrate electrode materials in capacitive deionization: A comparison study

Role of ion exchange membranes and capacitive electrodes in membrane capacitive deionization (MCDI) for CO2 capture

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Electrochemical Removal of Cesium Ions via Capacitive Deionization Using an Ion-Exchange Layer Coated on a Carbon Electrode

Membrane capacitive deionization (MCDI) for selective ion separation and recovery: Fundamentals, challenges, and opportunities

Capacitive deionization of NaCl solutions using carbon nanotube sponge electrodes

Selectivity toward heavier monovalent cations of carbon ultramicropores used for capacitive deionization

A two-pronged strategy to boost the capacitive deionization performance of nitrogen-doped porous carbon nanofiber membranes

Fabrication and Capacitive Adsorption Performance of Carbon Nanotube Film Electrodes

Enhanced Capacitive Deionization of Hollow Mesoporous Carbon Spheres/MOFs Derived Nanocomposites by Interface-Coating and Space-Encapsulating Design

ENHANCING COPPER REMOVAL THROUGH INTEGRATED CAPACITIVE DEIONIZATION WITH HETEROGENEOUS CATION EXCHANGE MEMBRANE

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon