Abstract:Advanced powertrain technologies have improved engine performance with higher power output, lower exhaust emission, and better controllability. Chief among them is the development of spark-ignition direct-injection (SIDI) engines in which the in-cylinder processes control the air flow motion, fuel–air mixture formation, combustion, and soot formation. Specifically, intake air with strong swirl motion is usually introduced to form a directional in-cylinder flowfield. This approach improves the mixing process of air and fuel as well as the propagation of flame. In this study, the effect of intake air swirl on in-cylinder flow characteristics was experimentally investigated. High-speed particle image velocimetry (PIV) was conducted in an optical SIDI engine to record the flowfield on a swirl plane. The intake air swirl motion was achieved by adjusting the opening of a swirl ratio (SR) control valve which was installed in one of the two intake ports in the optical engine. Ten opening angles of the SR control valve were adjusted to produce an intake SR from 0.55 to 5.68. The flow structures at the same crank angle degree (CAD), but under different SR, were compared and analyzed using proper orthogonal decomposition (POD). The flow dominant structures and variation structures were interpreted by different POD modes. The first POD mode captured the most dominant flowfield structure characteristics; the corresponding mode coefficients showed good linearity with the measured SR at the compression stroke when the flow was swirling and steady. During the intake stroke, strong intake air motion took place, and the structures and coefficients of the first modes varied along different SR. These modes captured the flow properties affected by the intake swirl motion. Meanwhile, the second and higher modes captured the variation feature of the flow at various CADs. In summary, this paper demonstrated a promising approach of using POD to interpret the effectiveness of swirl control valve on in-cylinder swirl flow characteristics, providing better understanding for engine intake system design and optimization.

Effect of the Incylinder Forced Swirls on Performance and Emission of Diesel Engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Numerical investigation of piston bowl geometry and swirl ratio on emission from diesel engines

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Investigation of Swirl Ratio Impact on In-Cylinder Flow in an SIDI Optical Engine

Experimental investigation of swirl motion of in-cylinder flow in CI engine under firing condition due to preinjection using PIV and POD techniques

A Simulation on Effect of Start-of-injection and Swirl Rate on Low Temperature Combustion

The effects of injection pressure and swirl on in-cylinder flow pattern and combustion in a compression–ignition engine

Combustion performance and energy distributions in a new multi-swirl combustion system

Effect of pre-chamber fuel injection parameters and EGR on the combustion and emissions of a heavy-duty diesel engine

Numerical investigation of in-cylinder combustion behaviors in a medium-speed diesel engine

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Experimental studies on the particulate matter emission characteristics of a lateral swirl combustion system for direct injection diesel engines

Numerical analysis of mixing and combustion characteristics of a lateral swirl combustion system in OP2S diesel engines

Effects of piston shapes and swirl ratios on combustion and emissions of a natural gas engine ignited by micro diesel pilot

Effect of Different Nozzle Arrangements on Combustion Flow Characteristics in a Swirl Coupling Multiple Direct Injection Combustor

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Influence of swirl intensity on combustion dynamics and emissions in an ammonia-enriched methane/air combustor

Combustion performance characteristics of double-layer diverging combustion chamber compared with re-entrant chamber and omega chamber

Visualization and Performance Analysis of Gasoline Homogeneous Charge Induced Ignition by Diesel