Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

In situ study on secondary dendrite arm coarsening of Sn-Bi alloy by synchrotron microradiography

In situ study on dendrite growth of metallic alloy by a synchrotron radiation imaging technology

In Situ Synchrotron X-ray Imaging on Morphological Evolution of Dendrites in Sn–Bi Hypoeutectic Alloy under Electric Currents

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

Fast Synchrotron X-Ray Tomographic Quantification of Dendrite Evolution During the Solidification of Mg-Sn Alloys

Dendrite Coarsening in Directionally Solidified Sn–36 At.%ni Peritectic Alloy in the Presence of the Migration of Secondary Dendrite Arms

Dendrite growth and grain “coarsening” in an undercooled CoNi equiatomic alloy

In-situ study on dendritic growth of Sn-Bi alloys by diffraction-enhangced X-Ray imaging

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Dynamic evolution of microstructure morphology in thin-sample solidification: Deep learning assisted synchrotron X-ray radiography

Dendritic Evolution During Coarsening of Mg-Zn Alloys Via 4D Synchrotron Tomography

The Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys: in Situ X-ray Radiographic Observation

Coupling in Situ Synchrotron X-ray Radiography and Phase-Field Simulation to Study the Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys

Evolution of dendrite morphology of a binary alloy under an applied electric current: an in situ observation

In Situ Study on Columnar-Equiaxed Transition and Anaxial Columnar Dendrite Growth of Al-15%Cu Alloy by Synchrotron Radiography

In situ synchrotron X-ray studies of the coupled effects of thermal and solutal supercoolings on the instability of dendrite growth

Evolution of Dendrite Morphology of a Binary Alloy under an Applied Electric Current: Anin Situobservation

Modelling of Secondary Dendrite Arms Evolution During Solidification by a Phase-field Method

In situ synchrotron diffraction and modeling of non-equilibrium solidification of a MnFeCoNiCu alloy

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys