Abstract:AlN-SiC solid solution particles with a variety of morphologies including faceted polyhedrons with or without ledges; hexagonal platelets; hexagonal columns with a hexagonal plate or a pyramidal cap; and interpenetrating cones, have been found in the combustion products of a mixture of Al, Si, and carbon black under a nitrogen pressure of 10 MPa. Combustion temperature (the growth temperature of crystals) is the most important factor controlling the morphology of crystals formed in the combustion product. When temperatures are close to the melting point of the solid solutions, a small driving force for nucleation and long distances of surface migration make nucleation on the basal plane difficult, and thus the solid solution particles tend to grow as platelets. Supersaturation is the second key factor influencing crystal growth. At relatively low temperatures, a low supersaturation at the large pores renders nucleation difficult and the solid solution particles tend to grow as platelets. At relatively low temperatures and high supersaturation, a relatively high driving force for nucleation and short mean distances of surface migration promote the growth of AlN-SiC solid solutions as polyhedrons. The formation of the ledges on the polyhedral particles is attributed to the differences in the evaporation rates and the deposition rates between Al and Si. At relatively low temperatures and an intermediate supersaturation, the solid solution particles grow as prismatic columns. The formation of the prismatic columns with a hexagonal plate, or a pyramidal cap, is attributed to a sudden change of temperature during combustion. A possible growth mechanism for the AlN-SiC solid solution cones is proposed.

Growth of flower-like AlN by combustion synthesis assisted with mechanical activation

Combustion Synthesis of Rod-Like AlN Nanoparticles

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Morphology-Controlled Synthesis of Quasi-Aligned Aln Nanowhiskers by Combustion Method: Effect of Nh4cl Additive

Mechanical activation assisted combustion synthesis of AlN-Al2O3 composite ceramic powder

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Highly Crystalline Aln Particles Synthesized by Shs Method

Mechanism and Kinetics Analysis of AlN Combustion Synthesis

Facile synthesis of monodisperse aluminum nitride microspheres

Effect of Additives on Self-Propagating High-Temperature Synthesis of Aln

Growth Mechanisms for SiC-AlN Solid Solution Crystals Prepared by Combustion Synthesis

Combustion synthesis of fine aluminum nitride powders under micropositive N 2 pressure with water additive

Investigation On Combustion Synthesis Of Aln Whisker

Effects of NH4Cl on the synthesis of aluminum nitride by the spontaneous combustion of mechanically activated aluminium powder

Growth of AlN Nanobelts, Nanorings and Branched Nanostructures

Gas-Phase Chemical Reaction Mechanism in the Growth of AlN during High-Temperature MOCVD: A Thermodynamic Study

Combustion Synthesis of AlN Whiskers

Growth of Spontaneous Nucleation AlN Crystals by Al-Base Alloy Evaporation in Nitrogen Atmosphere

Formation and evolution of quasi-aligned AlN nanowhiskers by combustion synthesis

Growth Mechanism Of Aln Synthesized By Directed Nitridation Of Molten Aluminium Alloys

Self-propagating high-temperature synthesis of AlN in a graphite crucible in air by mechanical activation