Abstract:Fluoropolymer films have so low surface energy that they have good special surface properties, such as water-resistant, oil-resistant and self-cleaning properties. Nowdays, surface properties of polyacrylates can be modified by introducing fluorine-containing groups to polymer chains. The acrylate copolymer emulsion containing fluorine was prepared, with fluoromoner ( Zonyl TM), butyl acrylate ( BA), methyl methylacrylate (MMA) as monomers, sodium dodocyl sulfonate ( SDS) as emulsifier. The solid content of copolymer emulsion was about 25wt%. The kinetics of emulsion copolymerization was studied by the weight method. The effects of the concentration of emulsifier, initiator, monomer and polymerization temperature on polymerization rate (R-p) were investigated in detail. The results showed that R-p proportional to [SDS](0.28), R-p proportional to [I](0.98). The apparent activation energy was 50.756 kJ.mol(-1). The copolymer emulsions had no change after stored at room temperature for 72 h, at 60degreesC for 48 h and at -5degreesC for 24 h respectively. The centrifugal stability of emulsions was characterized at 12000 r/min for 120 min. The sedimentation ratios showed that the centrifugal stability of emulsions increased with increasing the amount of emulsifier, while decreased with increasing the amounts of initiator and fluoromonomer respectively. The latex films could be dissolved in THF and toluene, while could be swelled in methanol and ethanol. The water absorption of latex films decreased with increasing the amount of fluoromonomer. The surface property of films was determined by Wilhelmy method. The contact angles for latex films to water increased apparently by introducing fluorine-containing groups, above 100degrees. This result showed the water-resistant property of copolymer latex films containing fluorine was improved.

The polymerization and performance of fluorinated acrylic copolymer with low surface energy

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

The Study of the Acrylate Copolymer Emulsion Containing Fluorine

Preparation and Characterization of Copolymer Containing Fluorine-Silicon with Low Surface Energy

Preparation and Surface Properties Study of Novel Fluorine-Containing Methacrylate Polymers for Coating

Study on Synthesis of Fluorinated Acrylate Copolymer and Surface Hydro-Oleophobic Properties of the Copolymer Films

Synthesis of fluorinated monomer and formation of hydrophobic surface therefrom

Preparation Of Fluoro-Modified Acrylate Copolymer And Hydrophobicity Of Coatings Therefrom

Study on Crystallization and Surface Properties of Fluorinated Acrylate Copolymers

Synthesis Of Fluorosilicone Monomer And Application In Hydrophobic Surface Of Acrylic Copolymer

Study on Surface Wettability of Fluorinated Acrylate Copolymer Films

Higher Water Repellency Caused by a Reduced Employment of Low Surface Energy Structures

Synthesis and Cationic Photopolymerization of Fluorine‐containing Vinyl Ether Monomers for the Hydrophobic Films

Study on the Synthesis and Superhydrophobic Properties of Fluorinated Copolymers with Carboxyl Group

Preparation and Surface Property of Cationic Emulsifier-Free Fluorinated Polyacrylates

Study on Emulsion Polymerization of Perfluoroacrylates

Study on the Preparation and Surface Properties of Fluoroacrylate Copolymer Anti-Adherent

Synthesis and Performance of Novel Fluorinated Acrylate Polymers: Preparation and Reactivity of Short Perfluoroalkyl Group Containing Monomers

Preparation of fluorinated poly-acrylate resin with excellent hydrophobicity and oleophobicity using low fluorine monomer content

Preparation and Surface Properties of Fluorine-Containing Diblock Copolymers PLMA-Block-PFAEA