Abstract:We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow, by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor. The improved flow greatly lowers the footing effect during deep reactive ion etching (DRIE), and increases the proof mass by 54% compared to the traditional way, resulting in both improved device quality and a higher yield rate. Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair, which eliminates the nonlinear behavior by fixing the parallel-plate gap. The damping coefficient of the sensing motion is low due to the slide-film damping. A large proof mass is made using DRIE, which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage. The theoretical Brownian noise floor is 0.47 µg/Hz1/2 at room temperature and atmospheric pressure. The tested frequency response of a prototype complies with the low damping design scheme. Output data for input acceleration from −1 g to 1 g are recorded by a digital multimeter and show very good linearity. The tested random bias of the prototype is 130 µg at an averaging time of around 6 s.

A Capacitor-Free Cmos Low-Noise, Low-Dropout Regulator for Capacitive Micro-Machined Accelerometer Application

A Low-dropout Regulator with Low Quiescent Current and High Stability

Low-dropout regulator with no off-chip capacitor and ultra low power consumption

A Novel Fully On-Chip CMOS Low-Dropout Linear Regulator with Ultra Low Noise

A Low-Power, High-Stability and Capacitor-Free LDO

Capacitor-free, fast transient response CMOS low-dropout regulator with multiple-loop control

CMOS Low-Dropout Regulator with 3.3μa Quiescent Current Without Off-Chip Capacitor

Low Dropout Linear Regulator with No Off-Chip Capacitor and Low Power Consumption

A Low-dropout Regulator with Unconditional Stability and Low Quiescent Current

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A low-noise switched-capacitor interface for a capacitive micro-accelerometer

A Low-Noise Low-Offset CMOS Readout Circuit for MEMS Capacitive Accelerometers

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

An Impedance Adapting Compensation Scheme for High Current NMOS LDO Design

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer

A Low-Noise High-G Closed-Loop Capacitive Accelerometer Using Dc-Blocking Technique For Reduction Of Power Dissipation

An Oscillator-Based CMOS Magneto-Sensitive Biosensor with a Low Noise and Low Temperature Coefficient LDO Regulator

A High-Voltage Closed-Loop SC Interface for a ± 50 G Capacitive Micro-Accelerometer with 112.4 Db Dynamic Range