Abstract:Fully developed flow and heat transfer in metal-foam filled tube with uniform wall temperature (UWT) is semi-analytically investigated based on the Brinkman-Darcy model and the two-equation model, in which the inertia term, axial conduction, and thermal dispersion are ignored. A two-dimensional numerical simulation that adopts the full governing equations is also conducted to analyze the effects of neglected terms on flow and thermal transport performance by comparing with the semi-analytical solution. The effects of the relevant parameters and thermal boundary conditions including UWT and uniform heat flux (UHF) on the heat transfer characteristics are discussed based on the semi-analytical solution. The results show that the inertia term has a significant effect on the prediction of pressure drop, but has a relatively mild effect on Nusselt number. The axial conduction has significant effect on the Nusselt number at lower Reynolds number, and the effects of thermal dispersion can be neglected when the thermal conductivity ratio between fluid and solid is remarkably smaller for air/metal foam as example ( k f / k s <3×10 −3 ). The predicted Nusselt number of the semi-analytical solution is about 8% to 15% lower than that of the numerical solution with full model in the range of 4×10 −5 < k f / k s <3×10 −3 . Moreover, the temperature profile of solid is more sensitive to pore density and porosity than that of fluid under UWT condition. The Nusselt number under UWT is about 7% to 25% lower than that under UHF, and the difference is mainly determined by interfacial convection rather than solid conduction.

Thermal modeling of forced convection in a parallel-plate channel partially filled with metallic foams

Thermal transport analysis in parallel-plate channel filled with open-celled metallic foams

Analytical Solution of Forced Convective Heat Transfer in Parallel-Plate Channel Partially Filled with Metallic Foams

Analytical solution of forced convective heat transfer in tubes partially filled with metallic foam using the two-equation model

Fully developed forced convective heat transfer in an annulus partially filled with metallic foams: An analytical solution

Numerical Simulation Of Non-Equilibrium Conjugate Heat Transfer In Tubes Partially Filled With Metallic Foams

Analytical Solutions of Force Convective Heat Transfer in Plate Heat Exchangers Partially Filled with Metal Foams

Wall Heat Transfer Characteristic of Parallel-plate Channel Filled with Open-cell Metal Foams in Large Flow Velocity Range

Conjugated natural convection in horizontal annuli partially filled with metallic foams by using two-equation model

Numerical Investigation on Forced Convection of Tubes Partially Filled with Composite Metal Foams under Local Thermal Non-Equilibrium Condition

A Local Thermal Non-Equilibrium Analysis of Forced Convective Heat Transfer in A Metal Foam Filled Channel

Investigation of Mixed Convection Heat Transfer Through Metal Foams Partially Filled in a Vertical Channel by Using Computational Fluid Dynamics

Analytical and Numerical Study on Thermally Developing Forced Convective Flow in a Channel Filled with a Highly Porous Medium Under Local Thermal Non-Equilibrium

Experimental and Numerical Simulation of the Convective Heat Transfer in a Metal-foam Filled Rectangular Channel

Semi-analytical solution for fully developed forced convection in metal-foam filled tube with uniform wall temperature

Non-equilibrium convective heat transfer and volume fraction distribution of nanofluid in porous foams

Volumetric Convective Heat Transfer Coefficient Model for Metal Foams

Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams

LATTICE BOLTZMANN MODELING ON FORCED CONVECTIVE HEAT TRANSFER OF NANOFLUIDS IN HIGHLY CONDUCTIVE FOAM METALS WITH LOCAL THERMAL NONEQUILIBRIUM (LTNE) EFFECT

Forced Convective Heat Transfer in a Plate Channel Filled with Solid Particles

NUMERICAL SIMULATION OF FORCED CONVECTION HEAT TRANSFER IN POROUS PLATE CHANNELS USING THERMAL EQUILIBRIUM AND NONTHERMAL EQUILIBRIUM MODELS