Abstract:One-step metal-assisted chemical etching (MACE) was used to fabricate porous silicon nanowire arrays. Also, the effects of doping level, AgNO3 concentration, and HF concentration on the morphology and structure of porous silicon nanowire were investigated. The results show that the higher doping level is beneficial for etching the silicon wafer and forming silicon nanowire arrays. This is because the higher doping level introduces more impurities and defects on the surface of the silicon wafer, and at the same time, the Schottky barrier between the silicon wafer with the higher doping level and the solution is lower. Thus, the silicon wafer is easier to oxidate to form nanowire arrays. The AgNO3 concentration plays a critical role in the fabrication of the porous silicon nanowire arrays during the one-step MACE process. If AgNO3 concentration is too low or too high, corrosion pits and collapsed clusters of nanowires could form on the surface of the silicon wafer. When AgNO3 concentration was 0.02 mol·L-1, silicon nanowires grew and became longer, eventually forming a porous array of silicon nanowire. In the meantime, as silicon nanowires grew, capillary stress between nanowires caused agglomeration at the top of some nanowires. Furthermore, when HF solution concentration exceeded 4.6 mol·L-1, the length of silicon nanowire increased with increasing HF concentration. Furthermore, a porous structure was formed on top the silicon nanowire, and the porosity of the silicon nanowires increased with increasing HF concentration. This was due to a large number of Ag+ random nucleations at the top of the nanowires, and lateral etching of the silicon nanowires occurred. In the end, the formation process of the porous silicon nanowires is explained by a model based on the experimental phenomena. It is attributed to the deposition of silver ions and the oxidation of dissolved silicon substrates.

Metal-Assisted Chemical Etching Using Tollen’s Reagent to Deposit Silver Nanoparticle Catalysts for Fabrication of Quasi-ordered Silicon Micro/Nanostructures

Fabrication of antireflective layers on silicon using metal-assisted chemical etching with in situ deposition of silver nanoparticle catalysts

Electrochemically Prepared Porous Silver and Its Application in Surface-Enhanced Raman Scattering

Metallization of Silicon Nanowires and Sers Response from A Single Metallized Nanowire

Silver-Assisted Chemical Etching of Semiconductor Materials

Nanoscale silver-assisted wet etching of crystalline silicon for anti-reflection surface textures.

Silver catalysis in the fabrication of silicon nanowire arrays

Metal-assisted Electrochemical Etching of Silicon

Catalysis of Dispersed Silver Particles on Directional Etching of Silicon

Nano silver-catalyzed chemical etching of polycrystalline silicon wafer for solar cell application

Metal-Assisted Chemical Etching Of Silicon In Oxidizing Hf Solutions: Origin, Mechanism, Development, And Black Silicon Solar Cell Application

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Metal-particle-induced, Highly Localized Site-Specific Etching of Si and Formation of Single-Crystalline Si Nanowires in Aqueous Fluoride Solution.

Controllable and Facile Fabrication of Gold Nanostructures for Selective Metal-Assisted Etching of Silicon

Model for the mass transport during metal-assisted chemical etching with contiguous metal films as catalysts

Metal-assisted chemical etching of silicon: a review.

Etching Anisotropy Mechanisms Lead to Morphology-Controlled Silicon Nanoporous Structures by Metal Assisted Chemical Etching

Three dimensional metal film catalyst assisted etching of silicon

Optimization of Metal-Assisted Etchant Components for Fabrication of Porous Silicon

Effect of Isopropanol on Gold Assisted Chemical Etching of Silicon Microstructures

Porous Silicon Nanowire Arrays Fabrication Through One-Step Metal-Assisted Chemical Etching